We're a genuine UK seller with UK stock!

We sell thousands of petrol taps so check out our fantastic feedback!

We can get this to you usually within 3 or 4 days but please pay the extra £2 for Tracked24 1st class if you need it fast.

This is A NON VACUUM TAP for the models listed, It Replaces the factory fitted vacuum type and includes the rubber tank sealing gasket and 2 fibre washers.

The original Kawasaki part number for the vacuum type tap was 51023-0726G.

WE DO STOCK VACUUM TYPE TAPS FOR THESE BIKES TOO. JUST SEARCH IN OUR STORE SEARCH BAR

Fits Kawasaki Z650, KZ650, ZX650SR Z750, KZ750, KZ750 Spectre plus other models.

This is a brand new reproduced fuel tap for the Kawasaki models listed above. These taps have ON, OFF AND RESERVE settings

Note that our tap has the fuel outlet on the right. It exits to the SIDE.

BUT a 90° Fitting can be bought separately from us should you wish to exit the fuel to the rear. We have included an image of a tap fitted to a 1976 Z650B tank with the 90 degree fitting. THIS FITTING IS NOT INCLUDED IN THIS LISTING.

See our other listing... Search for 'Kawasaki fitting' within our store search bar or its item number 325355845756

You will need to change your fuel pipe when you fit this because this has a 6mm fuel outlet and the OEM is larger at 7mm.

We do sell the very best quality heavy wall thickness E5 and E10 resistant pipe in green tint to suit both the tap and your carburettor.

Don't mess about trying to reseal your 35 year old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or stop flowing fuel or just flow continuously.

Also the Kawasaki seal kits are an expensive gamble too because the inside of the tap will require a day of ultrasonic cleaning to get the hardened gunge and crystals out before you can even think about fitting the new seals! One of our customers has tried 3 seal kits without success 😢

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of the vacuum not working and fuel not flowing or leaking taps.

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!

This will be a direct fit on bikes with only one fuel outlet with connecting pipes between the carbs.

Your existing vacuum pipe should be blanked off with a small bolt and clip

* 2 Fibre washers for your 6mm bolts

* Connection to fuel line: 6 mm internal diameter fuel pipe

* Vacuum connection: NONE

Spare in tank filters are available from us too.

Our taps don't have a filter bowl on the bottom but there is an internal mesh filter within the bottom of the tap plus the tank internal syphon pipe is also a filter.

There is also a drain screw and sealing washer on the front which can be used to regularly drain the tap and any dirt as part of your servicing and maintenance regime 😁

See our images.

We recommend that you drain down annually and fit an inline fuel filter too. 

We sell those separately.

Dispatched with 2nd Class parcel postage.

1st class postage is £2 extra.

Please could you make your selection on purchase.

MadMopeds UK