Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

We've shown pictures of some old ones too so that you can compare yours.

PLEASE READ THIS LISTING ALL THE WAY THROUGH.

This will fit your classic Honda CB250N, CB250RS CB250RSA or CB400N Superdream Twin

Please be careful before you buy as others are listing the incorrect tap thread size and type for the Superdream.

Also others are selling taps with riveted front plates. We much prefer screwed front plates as they will allow maintenance in the future!

These are the very best taps available! 😊

We have supplied many of these to happy customers.

Replaces Honda part numbers

16950 385 703

16950 385 702

16951 434 015

This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.

Note that our tap has the fuel outlet on the right and a fuel strainer bowl on the bottom. The bowl is made from metal and not plastic like some others are.

The casting of our taps is superb, as good or better than the originals and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. I've tried all that and it just doesn't last. They generally leak through the front. Also the seal kits are expensive too.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us!

OK so this tap not original Honda but it is a much cheaper alternative than trying to get an original one. These are better than the originals anyway.

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

This will be a direct fit on your bike.

Connection to fuel line: 6mm internal diameter fuel pipe.

Main thread size on your tank stub is 16mm

PLEASE COULD YOU CHECK THAT YOURS IS THE SAME BEFORE PURCHASE AS THE CB250RSZ AND SOME IMPORTED BIKES AND SOME AFTERMARKET REPLICA TANKS WERE FITTED WITH A LARGER THREADED TAP. We sell the larger 18mm type too

We sell good quality clear E5 and E10 compliant 6mm  fuel pipe too if you need it.

Our taps are supplied with a seal and have an internal syphon pipe which is also a filter.

We recommend that you fit an inline filter too.

Please compare yours with our pictures before purchase.

Dispatched with Tracked48 2nd Class parcel postage unless you require faster Tracked24 1st class delivery at only £2 extra. Please make your selection on purchase.

MadMopeds UK