Here at MadMopeds we love solving engineering problems. We only sell products that we are confident will meet our own quality standards which are very high. We have fitted these taps ourselves and so you can buy with confidence!

We are a GENUINE UK BASED seller with UK stock!

Check out our excellent feedback too on these Suzuki taps.

We can get this to you usually within 3 or 4 days, we usually post every day.

This will fit your bike if your hole centers are 44mm. Please compare the pictures with yours to ensure that it will fit your bike.

For Suzuki GSX750F, GSX600F Katana  models with 2 fuel outlets from 1988 to 1997

This is a brand new reproduced fuel tap and it has the primer setting so that you can prime the carbs without running the bike.

Note that our tap has the fuel outlets on the left and right and the vacuum pipe on the rear

The casting of our taps is superb, the front plate has been made to look exactly like the original.

Don't mess about trying to clean, scrub or pay a fortune to ultrasonically clean and reseal your nearly 40 year old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front and are corroded inside anyway or they flow fuel continuously. Old petrol tends to crystallise inside fuel taps and carburettors. Also the petrol fuel seal kits are expensive too.

OK so this tap not original Suzuki but it is a much cheaper alternative than trying to get an original one. Remember that new old stock could actually be 40 years old now!

My taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any leaks, vacuum system, casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer. Nobody who has bought these from us has had a problem with fuel flow or quality.

Fitting this will eradicate all the usual problems of the vacuum not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!

Mounting Hole spacing is 44mm

Hole diameter is 6.5mm for your 6mm bolts

Connection to fuel line: 7 or 8 mm pipe 

Vacuum connection: 5 mm pipe.

Our taps don't have a filter bowl on the bottom but the internal syphon pipe is also a filter. We recommend that you fit an inline filter too.

We sell spare seals, filters and fuel pipe to suit this tap.

Dispatched with 2nd Class parcel postage , if you need it faster, please pay only £2 extra for 1st class.

Make your selection on purchase please.

MadMopeds UK