A3 High Speed Hot Cold Roll Laminator

Small automatic laminating machine can protect printing charts, contracts and 

important documents, improve the grade,waterproof, mildew proof, anti oxidation,

tamper proof and scrubbable. It is a common tool for office printing,advertising 

graphics and photo studio. With the progress of technology,the function of small 

film machine is constantly improved, and it has been expanded to plate film,

mobile phone case film, paper art To increase revenue.
Features:
The system judges automatically. If manual violation is found, the system rejects unreasonable instructions, takes over the machine, enters the full-automatic mode, and intelligently controls to prevent burning.

One key quick control panel: 

1.Click the "HOT" key: automatically preheat, sound prompt and constant       temperature, and call again.
2.When the motor is stationary, if the temperature regulation exceeds the safety limit, the system identifies violations and intelligently controls them, which is very safe.
3.Click the "COLD" key: cut off the heat source and enter the cold mounting or cooling mode. The operation is simple.
4.Point(EXIT) key:free hands and prevent mistakes.
Sound warning: duty free preheating, sound prompt;
Fault warning and automatic shutdown;
No response warning for timeout;
If you forget to shut down, the system will shut down automatically;
Easy and safe operation.

Film covering width:A3+/33cm（Length customization）

Paperboard thickness:0.1-5mm（With stepless clutch）

Film mulching speed:0.3-3M/minute（Nine speed transmission）

Power supply:110V/60hz（Total power 600W）

Temperature:0-180℃（Preheating is only 3 minutes）

Main engine weight:About 6kg
Hot mounting/cold mounting; single/double side:

Cold mounting and hot mounting are based on the different classification of laminating

 consuma bles,both belong to"laminating". Therefore, the so-called laminating includes

 hot laminating and cold laminating. Our small film machine not only supports hot 

mounting consumables BOPP and pet hot melt adhesive pre coating, but also supports 

a wide range of cold mounting film, self adhesive and self mounting materials. Small 

film machine in addition to one side of the film. but also can be hot mounting on both 

sides at the same time. Users should flexibly apply the two kinds of consumables 

according to the requirements of customers and the compatible characteristic s of 

products. If part of the printing substrate does not support high temperature, you can 

use cold mounting film to complete the lamination operation.

Item Included:
One set of A3 Roll Laminator(110V)(120141)

 

A2 High Speed Hot Cold Roll Laminator 120156

Small automatic laminating machine can protect printing charts, contracts and 

important documents, improve the grade,waterproof, mildew proof, anti oxidation,

tamper proof and scrubbable. It is a common tool for office printing,advertising 

graphics and photo studio. With the progress of technology,the function of small 

film machine is constantly improved, and it has been expanded to plate film,

mobile phone case film, paper art To increase revenue.
Features:
The system judges automatically. If manual violation is found, the system rejects unreasonable instructions, takes over the machine, enters the full-automatic mode, and intelligently controls to prevent burning.

One key quick control panel: 

1.Click the "HOT" key: automatically preheat, sound prompt and constant       temperature, and call again.
2.When the motor is stationary, if the temperature regulation exceeds the safety limit, the system identifies violations and intelligently controls them, which is very safe.
3.Click the "COLD" key: cut off the heat source and enter the cold mounting or cooling mode. The operation is simple.
4.Point(EXIT) key:free hands and prevent mistakes.
Sound warning: duty free preheating, sound prompt;
Fault warning and automatic shutdown;
No response warning for timeout;
If you forget to shut down, the system will shut down automatically;
Easy and safe operation.

Film covering width:A3+/44cm（Length customization）

Paperboard thickness:0.1-5mm（With stepless clutch）

Film mulching speed:0.3-3M/minute（Nine speed transmission）

Power supply:110V/60hz（Total power 600W）

Temperature:0-180℃（Preheating is only 3 minutes）

Main engine weight:About 7kg
Hot mounting/cold mounting; single/double side:

Cold mounting and hot mounting are based on the different classification of laminating

 consuma bles,both belong to"laminating". Therefore, the so-called laminating includes

 hot laminating and cold laminating. Our small film machine not only supports hot 

mounting consumables BOPP and pet hot melt adhesive pre coating, but also supports 

a wide range of cold mounting film, self adhesive and self mounting materials. Small 

film machine in addition to one side of the film. but also can be hot mounting on both 

sides at the same time. Users should flexibly apply the two kinds of consumables 

according to the requirements of customers and the compatible characteristic s of 

products. If part of the printing substrate does not support high temperature, you can 

use cold mounting film to complete the lamination operation.

Item Included:
One set of A2 Roll Laminator(110V)(120156)

Shipping & Handling Details

Default  Shipping Cost or Free Shipping Information: 
▲ Default    shipping cost or free shipping service is only for the customers    from Canada or the lower 48 United States by Canada Post, USPS or    the UPS Ground. Customers from other areas or needs other shipping    ways, please contact us.
 ▲ Buyers    from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,    Hawaii, PO Boxes, APO/FPO addresses or other  countries/areas, there   WILL be extra shipping costs, please  contact us for more detailed   information.
 ▲ Please    make sure your address is valid for both UPS and USPS services.  Any   costs incurred because of incorrect or undeliverable address  should   be undertaken by buyer.

Handling  Time: Shipping    is usually made in 1-3 business days after payments cleared.  Orders   are processed from Monday-Friday; Not on the weekends &  public   holidays.

Sales tax /  Customs  duties: Any    sales taxes or Customs duties are not included. If came out, they    must be undertaken by the buyer.

Damage In  Shipping: Email  or call us First! We  will work  with you to get the case resolved in  the fastest method.

Return /  Refund

If you are not 100% happy  with your  purchase, please  contact Us. Please don't directly opened  a  request or case without  informing us, or else, we will do some   discounts on the warranty and  other sales-services later on. Hope   for your understanding.

Returns & Exchanges

▲ All    returns must be made within 14 days of delivery date. Items must  be   in new, unused condition, with all original materials included  with   the shipment. A partial refund may be applied for opened or  damaged   items, depending on the condition.
 ▲ Items    returned under the buyer’s remorse: The return shipping fee must  be   covered by the buyer; The original shipping cost will also be    deducted from the refund. 15% restocking fee of the items purchase    price will be charged. 
▲ Returns    that are the result of our seller's error: Buyer will receive a   full  refund of the item as well as shipping charges
▲ All    returns require a RA (Return Authorization) number that will be    given by our seller. Please contact with us at first for more    details.

Defective & Damaged  Products 

 ▲ If    product was received damaged or not as described, please send us    some pictures or videos, so we could well understand your problem,    then solve them for you ASAP. Besides, it's much helpful for us to    claim with UPS, remind our related department to pay much more    attention to packaging later on. Hope for your understanding.
 ▲ Replacement    or refund of defective or damaged products can only be returned in    exchange for the exact same product, or else, the purchase price    will be refunded back to your original payment method. 
 ▲ If    an item is received damaged, customer service must be contacted    within 7 days of receiving your item. All returns require a RA    (Return Authorization) number as above.

Payment

eCheck  Issues: Payments   via  eCheck do not clear immediately. Usually you will wait 5-7   days  after checkout for it to clear. Then we will arrange   shipments  for you.

Warranty & Feedback

▲ 6    months' warranty for the machines, not for the consumables. We   stand  behind our products all the item, so even if your warranty   period  has expired, you can still seek for service or technical   support  from us with low cost.
 ▲ Any    warranty shipping cost to us is responsible by buyer.
 ▲ Any    shipping cost to buyer is responsible by the seller. 
▲ We    committee to the customer satisfaction and want to bring you the    best purchase experience. If there is any problems, please contact    us ASAP. If not, please leave us a positive feedback as it's very    important for us. Thanks very much.
 
 

On Nov 16, 2022 at 00:52:28 PST, seller added the following information:

DataCaciques