When a package is shipped internationally, it may be subject to import taxes, customs duties, and/or fees imposed by the destination country. These charges will typically be due once the shipped goods arrive at the country of destination.
This will allow you to remove the hose and use your wine device, not attached to tank. Hose is only attached during refill.
Argon cartridge replacement device.
argonwineadapter.com
Wine pouring device, Cylinder and argon gas are not included.
Not affiliated or sanctioned by Coravin
MY argon wine adapter handle is REFILLABLE. 500 psi system shown. Unscrew your capsule
holder and empty capsule and screw in the refillable handle. Connect
the quick disconnect to the handle. Turn on the gas at the tank , make
sure slide check is up position and in 1 second the handle is charged with enough argon to fill 5 to 7 five once glasses,depending on how much pressure is coming
out of the regulator. My refillable handle has been pressure test to
1000 psi. My recommendation is 500 and lower due to nylon hose . I
have a quick disconnect on the end of the hose, much like a air hose
connection. There is also a slide check valve , allowing to turn off the
gas at the line sliding it up for on and down for off. I would advise to
shut off gas at the tank after every fill up to avoid accidental
opening of the slide check valve. This device will attached to all my other quick disconnects products I have sold.
In following up with my customer base, I have been made aware of a potential issue with the first generation models, 1000 and 8 (eight). These models may leak gas from being either worn out, broken or defective.
Although Argon gas is inert and harmless, it does have the potential to be dangerous. If argon leaks out in a small room that is not very well ventilated, it could potentially rid the room of the necessary oxygen to breath. Use caution and shut off the gas at the tank or the shut off valve at the handle after every use.
Thank you.
The Argon Wine Adapter
is my solution to overpriced capsules . Dont' spend your hard earned money.
Very simple :
You need a cylinder of argon, known as a CGA- 580 cylinder. Size ? Find one that suits your needs.Remove the argon capsule holder and screw on the adapter that's connected to a cylinder of argon.
About:
John's Wine Solutions LLC was founded in 2015 by John Steach. John has always been an avid wine collector, along with a 40 year background in the automotive industry and a passion to build better (mouse traps). With many friends in the restaurant and wine distribution business, John heard their cry for help from the high cost of argon capsules. Although the wine pouring Device opens up greater possibilities for glass pours and less waste, the overwhelming fact is that the capsules are very costly.....Costing as much as $.53 cents a pour for 5 ounces. John developed the Argon Wine Adapter out of necessity to lower the cost of capsule pours. Down to $. 01 cent on a 5 ounces pour from a 40cf argon cylinder . After time with prototype development and design improvements, we are proud to offer the Argon Wine Adapter worldwide. Over 2000 sold in 5 years.
International sales: shipping cost approximately $65.00. Check rates in shipping details.
Instructions for Refillable Handle.
1. Install regulator to gas cylinder
Hand tighten is good.
2. Install refillable handle to Coravin.
3. Install quick disconnect to refillable handle.
4. Move slide check black ring to the down position. (off).
5. Turn on gas at cylinder (tank).
6. Move check slide black ring to up position (on, fill)
after 2 seconds handle is filled.
7. Move slide check down (off),
there will be a wushing sound of some gas escaping
this is normal.
8. Remove quick disconnect. and shut off gas at tank.
and ENJOY !!!
Will need to know the name of you argon system in order to get you the regulator that fits your cylinders.
See photo 6 for most common.
Custom Duties and Import VAT:
No guarantee on how long your custom office will hold adapter before releasing it to you, or extra charges, if any.
Instructions for Refillable Handle.
1. Install regulator to gas cylinder
Hand tighten is good.
2. Install refillable handle to Coravin.
3. Install quick disconnect to refillable handle.
4. Move slide check black ring to the down position. (off).
5. Turn on gas at cylinder (tank).
6. Move check slide black ring to up position (on, fill)
after 2 seconds handle is filled.
7. Move slide check down (off),
there will be a wushing sound of some gas escaping
this is normal.
8. Remove quick disconnect. and shut off gas at tank.
and ENJOY !!!