Brian Tooley Racing BTR Stage 3 NA Cam V2 - LS1 LS6 LS2 LQ4 LQ9
Fits 1997-2013 LS Based Engines 4.8L 5.3L 5.7L 6.0L 6.2L
Specs: 227/24x .636"/.636" 111.5LSA, 3-Bolt Pattern
Choose the kit that's right for you. Choose the Camshaft or the Cam and Spring Kit with Titanium or Steel Retainers and add the Gasket Kit.
This spring kit includes BTR Platinum dual springs with Retainers and Seals, and 7.400" 5/16 Chromoly Pushrods
The Gasket Kit Includes: Front Timing Cover Gasket, Timing Cover Damper Seal, Water Pump Gaskets and Crankshaft Damper Bolt.
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 3 V2 cam is the latest offering in the LS1/LS2 line up. This camshaft has an aggressive idle, and works well in the mid to upper rpm range with 18% horsepower gains at peak over the OEM LS2 camshaft. This camshaft will not require any flycutting of pistons with OEM combustion chamber size. If you mill your heads, it is always advised to check piston-to-valve clearance.
An aftermarket stall is necessary to help unlock this camshaft's full potential.
These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Note:
- VVT engines will require a VVT delete kit
- If installing in an engine originally equipped with a 1-bolt camshaft, a 3-bolt conversion kit will be required.
- DOD/AFM Engines will require a conversion to conventional lifters