IS300 IS200 Altezza 01-05 Gauge Pod Steering Column Center

Looking to upgrade your IS? This custom 3D printed part goes on the steering column cover to fit a 52mm or 2 1/16 gauge. The design follows the contours of the steering column cover for a clean look. This will work on any IS300 01-05, IS200 99-05 or Altezza 98-05. 

• Fits a 52mm or 2 1/16 gauge
• Can be made in RHD. Contact me before purchasing for the Altezza
• Drilling into the steering column cover is required, comes with a drill template for installation does not come with mounting hardware
• Commercial grade material: Made out of black ABS plastic, which is the same material most automotive interior plastic is made of
• OEM interior parts are 3D scanned for a factory fitment
• Gauge pod finish is a matte/satin which compliments the interior 
• Manufactured to stand up to any interior temperature. 
• Made in the U.S.A.
• Designed by a Gearhead for Gearheads! 

This is a raw 3D printed part you will see small lines leftover from manufacturing. My equipment and material produce a part that looks like a factory piece. I prefer the 3D printed look but the part can be sanded and painted to your preference. 

Installation is simple. You remove the cluster trim and the steering column cover and drill two holes in the steering column cover with the supplied template. The pod is held in place by two bolts that go through the steering column cover. I recommend using M4x10 bolts,M4 nut and a washer for proper fitment. Once installed you can't see any of the hardware. Every pod comes with a drill template for proper placement. 

I designed this with a 52.5mm hole for the gauge. Not all gauges are 52mm be sure to test fit your gauge DO NOT JUST PRESS IT IN. If you feel heavy resistance inserting the gauge, the design will need sanding or you have a gauge larger than 52mm. My gauge pod designs are meant to fit snugly so you don't have any rattles or noises. Inexpensive gauges are either larger or smaller than 52mm. If your gauge is loose add a layer of tape until it fits.

Looking for more custom IS300 or Altezza gauge pods? Check my shop for other designs. I make designs for many different vehicles and I’m always creating more!

Questions? Send me a message, I want to make sure this is the right fit for what you need. 

Do you sell files?

Ebay is a platform for selling physical items. While many 3D designs are shared or sold on file sharing sites I only sell finished prints.  All listings in my shop are original designs and are not available on any file sharing platforms. I encourage anyone with a 3D printer to learn how to 3D design.

Disclaimer: This listing is only for the 3D printed part. It doesn't come with the gauges, interior trim or mounting hardware.

Welcome to Driven2Print! I’m a Chicago based gearhead with a passion for 3D printing. I have 15+ years of professional experience in the printing and design industry. I use commercial grade printing equipment and high-quality materials for all my parts.

Every item in my shop is a custom part that takes many hours and revisions to develop. All of my designs start with OEM parts to create the best possible fitment. I take the time to measure, design, revise, test, and generally obsess to make sure that it fits like it came from the factory. I focus on quality. If I wouldn’t put it in my own car, I won’t sell it.

Just like with many aftermarket automotive products there are many cheaper imitations. Lower-priced listings are out there that are similar to my products. Some are exact copies of my own designs and photos. But they’re cheaper for a reason - they aren’t made with high-quality materials, they won’t fit as well, and they won’t hold up. Buy with confidence from my shop.