Converts your factory two-speed wipers to have three delay speeds in addition to the factory slow and fast speeds.  You must have the two-speed wiper switch.  Will work with the single speed motor but you must have a two speed switch.  Will work with 12V models only.  Must be a VW.  

The internal software monitors the switch to determine if the wiper speed needs to change.  Much like paddle shifters can be used to sequence an automatic transmission up or down the gears, the stock switch tells the software to increase or decrease the current setting.  Move the switch briefly to the fast position and then back to the middle will shorten the delay one notch.  Moving the switch briefly to the off position and back to the middle will lengthen the delay one notch.  There are six possible states: off, once every 8 seconds, once every 5 seconds, once every 3 seconds, continuous slow, and continuous fast.  Use the stock switch as previously described to sequence through the possible states.  Leave the switch in the fast position to instantly move to the stock fast speed.  Leave the switch in the off position to immediately go to the off state.  

Utilizes the stock switch for a completely stock appearance.  Installs behind the dash between the switch and harness.  You will need to remove the switch from the dash so you can get to the connections.  You will need to follow the directions and make the necessary connections.  All necessary hardware included.

Visit revolutionelectronics.com for more details and to download the instructions.