Features...
- A full spacer kit including extra-long bolts with locks
- Thatcham approved locks - high security
- All bolts have 'floating' radius washer (correct for OE Porsche wheels)
- No wheel vibrations (unlike cheap spacers)
- Correct 170mm outer diameter to perfectly match Porsche hubs
- NOT to be confused with cheap kits!
This kit includes...
2 x 15mm hub-centric spacers for rear wheels
2 x 7mm hub-centric spacers for front wheels
8 x Non-locking bolts for use with 7mm spacers
8 x Non-locking bolts for use with 15mm spacers
2 x Locking wheel bolts for use with 7mm spacers
2 x Locking wheel bolts for use with 15mm spacers
1 x Key adaptor to fit all four locks
1 x Fitting guide / instructions
This is everything you need to space your front and rear wheels. This combination of 7mm at the front and 15mm at the rear is the perfect, most proven set-up on Porsches. IMPORTANT: You must check wheel arch clearance before ordering.
The spacers
Two 15mm wheel spacers are included in this kit. These should NOT be confused with cheap universal items! They are precision machined from billet aluminium and designed for a perfect hub-centric fit. They are perfectly balanced and so will not disturb the vehicles wheel balancing. They are machined from billet aluminium - not cheap cast aluminium and are clear anodised for long lasting corrosion protection.
The non-locking bolts
This kit includes Porsche style extended length wheel bolts. They feature the 'captive' (freely rotating) washers and 'radius' seats that you would find on an OE Porsche wheel bolt. They are made to the same high standards and actually have a superior plated finish! We believe these are the BEST bolts you could possibly fit to your Porsche.
These bolts are far superior to ordinary 'compatible' bolts. They feature a dished top design and the correct 19mm hex head as found on original Porsche bolts.
The Locking bolts
Specially designed for use with Porsches when 7mm spacers have been fitted to the front and 15mm to the rear. The outer ring is free to rotate without unthreading the bolt. This means the bolt cannot be gripped without the key - an excellent security device! The bolts are made from heat treated carbon alloy steel and are drill and punch resistant. They are Thatcham tested and approved and are manufactured to ISO9001 & QS9000 standards.
Each locking set is supplied with a unique key code (found on a sticker inside the box). This should be kept in a safe place and if the key were ever lost a replacement can be purchased. Note: The key profile design shown in the picture will vary from one set to the next - every set is different!
Check clearances
Please measure the space available inside the arch lip and with respect to other suspension components BEFORE ORDERING. THIS PART IS THE BUYERS RESPONSIBILITY!
Fitment list...
Porsche 911 (996) (1997 - 2005)
Porsche 911 (997) (2005 - 2012)
Porsche 911 (991) (2012 - 2016)
Porsche 911 (992) (2016 +)
Porsche Boxster (986) (1996 - 2004)
Porsche Boxster (987) (2004 - 2012)
Porsche Boxster (981) (2012 - 2016)
Porsche Boxster 718 (982) (2016 +)
Porsche Cayman (987C) (2005 - 2012)
Porsche Cayman (981C) (2012 - 2016)
Porsche Cayman 718 (982C) (2016 +)
Porsche Panamera (970) (2009 - 2017)
Porsche Panamera (971) (2017 +)
Front Spacer Specifications
Spacer material: Billet aluminium
Spacer finish: Clear anodised
Spacer thickness: 7mm per spacer
Spacer overall diameter: 160mm
Spacer centre hole (hub centre diameter): 71.6mm
Spacer PCD of bolt holes: 130mm
Rear Spacer Specifications
Spacer material: Billet aluminium
Spacer finish: Clear anodised
Spacer thickness: 15mm per spacer
Spacer overall diameter: 160mm
Spacer centre hole (hub centre diameter): 71.6mm
Spacer PCD of bolt holes: 130mm
Non-Locking Front Bolt Specifications
Bolt thread size: M14 x 1.5
Bolt thread length: 37mm
Bolt overall head width: 27mm
Bolt overall length: 67mm (inc the head)
Bolt seat type: Radius (Round shaped)
Bolt material: Heat treated carbon alloy steel
Bolt finish: Bright zinc plated
Bolt spanner size: 19mm Hex
Non-Locking Rear Bolt Specifications
Bolt thread size: M14 x 1.5
Bolt thread length: 45mm
Bolt overall head width: 27mm
Bolt overall length: 75mm (inc the head)
Bolt seat type: Radius (Round shaped)
Bolt material: Heat treated carbon alloy steel
Bolt finish: Bright zinc plated
Bolt spanner size: 19mm Hex
Locking Bolt Kit Specifications
Thread size: M14 x 1.5
Thread length: 35mm (front) / 45mm (rear)
Overall bolt width: 24mm
Overall bolt length: 63mm (front) / 72mm (rear)
Seat type: Radius (round shaped)
Bolt material: Heat treated carbon alloy steel
bolt finish: Black zinc platedKey adaptor width: 29mm
Key adaptor spanner size: 19mm Hex
Key adaptor material: Heat treated carbon alloy steel