Detailed Description:

Reverse Osmosis 200 to 300 GPD Diaphragm Booster Pump

(120 volt)DC 24 V Transformer + 2 Pcs Connect Fittings (1/4 tube x 3/8 Threaded )+  High Pressure Shut Off Switch + 1/4 inch Tube OD quick fit Solenoid Valve

Note: Using Booster pump is recommended for those who they have low incoming city water pressure less than 50 PSI or well water tank pressure 40 - 60 PSI. Buy this product only when your waste is not shutting off and/or the tank is not filling up after 2 hours. (do not buy this pump if you are on city water pressure is 55 PSI and up).  Contact us first if you are not sure what you are buying. This pump will not increase the production volume or  the pressure for those who they are on city water pressure 55 PSI and up.  This pump will not help for those who would like to increase the water transfer volume to the ice maker or the fridge, that product named a demand pump or delivery pump which is completely different product.  Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well if your city water pressure is lower than 50 PSI.  Boost pressure 80 PSI

    This pressure gauge should be installed in between the third and forth stage before or after the auto shut off valve in your reverse osmosis system. You have to measure the PSI in your system when the pre-filters are new (usually it should be reading between 55 to 65 PSI).  Any pressure drops  (normally that will start after couple of months when the filters start clogging with dirt) then the pressure gauge will start reading between 45 to 50 PSI) therefore this is a visible indication for you to change the filters.

    High pressure switch for reverse osmosis booster pump ( on - off) operation control. High pressure switch job is to turn off the booster pump when the tank is full.The pump will automatically control all residential reverse osmosis systems.  The pump turns on to produce water into the pressure tank, and then turns off when the pressure tank is full.

    This pump are able to work at least 3 months continuously without stop

pressure-guage-1000

Features:

  • This  booster pump is designed for membranes rated 200 to and 300 GPD.
  • It can be mounted in several positions
  • Safe power operation with, low energy (low voltage - 24 volt). Transformer included.
  • The motor of these boosters is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiencies
  • never Mind if its installed in warm, humid, hostile environment where other pumps can’t operate in such hard environments.
  • Product total weight with transformer 6 Lbs - Booster dimensions 6.5 inch X 4 inch X 4 inch

Detailed Description:

  • All required fittings & instruction manuals are included to DIY your own installation.

Warranty:

  • One Year Limited Warranty.

Pump Specifications:

  • Volts :24 VDC
  • Open Flow: 2.1 Lpm
  • Inlet pressure: 30 Psi
  • working pressure: 82  - 100 +/- 10%
  • This pump can be used with reverse osmosis systems 200- 300 GPD only
  

Transformer Specifications:

  • Input 100 - 240 VAC 50/60Hz
  • Output Volts :30 Volt DC 2A
   maxwater-terms