18514-MP
STORE CATEGORIES
Product Description
200-Watt Bridgeable Power Amplifier Class D
This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers.
It can deliver 100 watts per channel into 8-ohm loads or 125 watts per channel into 4-ohm loads.
Additionally, the output can be bridged to provide 225 watts to a single 8-ohm speaker.
It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems.
The amp can be configured for always on, signal detection, or triggered power on status.
It also includes a 12-volt trigger output for controlling other devices.
Features :
Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loads
Bridgeable output provides 225 watts into a single 8-ohm load
4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
12-volt trigger input for power-on/off
12-volt trigger output for controlling other devices
Buffered loop output of original signal for connection additional amplifiers
Rear panel volume gain adjustment
Built-in thermal and short circuit protection circuits
Includes rack-mount ears for mounting a single amp or two amps side-by-side
Full Specifications :
Audio Inputs : Stereo analog RCA line input
Audio Outputs : Buffered stereo analog RCA loop line output
Output Power :
100 watts/channel into 8 ohms with 0.1% THD+N or
125 watts/channel into 4 ohms with 0.5% THD+N or
225 watts into a single 8-ohm load with 0.2% THD+N
Minimum Output Impedance : 4 ohms in stereo mode / 8 ohms in mono bridged mode
Trigger Input : 12 VDC, 10 k?
Trigger Output : 12 VDC, 100mA
Input Power : 100 ~ 240 VAC, 50/60 Hz, 2.5A
Standby Power Consumption : = 0.5 watts
Dimensions : 8.5" x 10..5" x 1.8" (216 x 267 x 45 mm)
Weight : 4.0 lbs. (1.8 kg)
This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers.
It can deliver 100 watts per channel into 8-ohm loads or 125 watts per channel into 4-ohm loads.
Additionally, the output can be bridged to provide 225 watts to a single 8-ohm speaker.
It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems.
The amp can be configured for always on, signal detection, or triggered power on status.
It also includes a 12-volt trigger output for controlling other devices.
Features :
Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loads
Bridgeable output provides 225 watts into a single 8-ohm load
4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
12-volt trigger input for power-on/off
12-volt trigger output for controlling other devices
Buffered loop output of original signal for connection additional amplifiers
Rear panel volume gain adjustment
Built-in thermal and short circuit protection circuits
Includes rack-mount ears for mounting a single amp or two amps side-by-side
Full Specifications :
Audio Inputs : Stereo analog RCA line input
Audio Outputs : Buffered stereo analog RCA loop line output
Output Power :
100 watts/channel into 8 ohms with 0.1% THD+N or
125 watts/channel into 4 ohms with 0.5% THD+N or
225 watts into a single 8-ohm load with 0.2% THD+N
Minimum Output Impedance : 4 ohms in stereo mode / 8 ohms in mono bridged mode
Trigger Input : 12 VDC, 10 k?
Trigger Output : 12 VDC, 100mA
Input Power : 100 ~ 240 VAC, 50/60 Hz, 2.5A
Standby Power Consumption : = 0.5 watts
Dimensions : 8.5" x 10..5" x 1.8" (216 x 267 x 45 mm)
Weight : 4.0 lbs. (1.8 kg)
Payment can be made by paypal.
(Not Selected)
We hope that you will be happy with your purchase. We will gladly accept returns within 30 days. Please contact our customer service representatives.
Smart Box Systems © 2009-2021 . All Rights Reserved.