FIRST DAY FREE
SHIPPING W/TRACKING NUMBER
100%
Satisfaction Warranty & Premium-Quality Guarantee
60 Days Money back
Guarantee
MB102 Solderless
Breadboard Protoboard 830 Tie Point Test Circuit PCB Set
Product description:
100% Brand new and high quality.
MB102 Breadboard 830
Points:
830 tie-point IC-circuit area plus 2x100 tie-point distribution strips
providing 4 power rails.
White ABS plastic body with black printed legend. Color legend on distribution
strips.
With self-adhesive tape on the back, make it easy to stick on the Arduino
Prototype Shield.
830 tie points total. 200 in 2 power rails
Features:
- Solderless
- terminal Strip, tie-point 630
- Distribution Strips, tie-point 200
- Wire size: Suitabe for 20-29 AWG wires
- Size: 16.5 x 5.5 x 0.85 cm.
-----------------------------------
Breadboard jumper cable
wires 65PCS:
49 pcs 120mm length*2
8 pcs 150mm length*2
4 pcs 200mm length*2
4 pcs 240mm length*2
Description:
100% Brand new and high quality.
The male to male flexible breadboard jumper wire provides an easy way for you
to build your own circuitry on a breadboard, ideal for creating circuits between
your microcontroller and the breadboard on the bots with both ends of a
prototyping board connector.
Features:
- Material- pure copper wire,PVC,Good conductivity,can be used repeatedly
- Color & Size - Green,white,black,yellow,red,orange - 4.72 inch(65pcs),6.29
inch(15pcs),7.87 inch(10pcs),9.84 inch(10pcs),many kinds of colors and sizes
can do all kinds of circuit experiments.
-----------------------------------
Breadboard Power Supply
Module:
Description:
100% Brand new and high quality.
Very easy to use power supply board for use with the MB102 Breadboards. You
have two separate power supplies 3.3v or 5v. You can have two different
voltages or both
can be set the same. The voltage outputs are set by jumpers on each output. The
board can be powered from a wall wort power supply 6.5-12volts. It works great
for
powering your Arduino or Raspberry Pi project boards.
Features:
For MB102 breadboard, two way independent control, can be switched to 0V, 3.3V,
5V.
Fit for: MB-102 Breadboard;
Input Voltage : DC 6.5-12V;
Output Voltage : DC 3.3V 5V;
Locking ON / OFF Switch, no need to unplug the power adapter.
LED Power Indicator indicated when the board is powered up.
Output Current: 700mA(Max);
Total Size : 51 x 32 x 19mm/ 2" x 1.3" x 0.75" (L*W*H)
-----------------------------------
Please check and choose what you need, We appreciate your business!
PACKAGE 1:
1pcs Power Supply
Module
1pcs 830 Tie-Points
Breadboard
1pcs 65 Jumper
Wire
20pcs Female-to-Male
Dupont Wire
2pcs Pin Header
(40 Pins)
1pcs 9V Battery
Clip
1x 130 DC Motor
5pcs Diode Rectifier (1N4007)
5pcs NPN
Transistor 8050
5pcs PNP
Transistor 8550
1x IC 74HC595 8 bit Shift Register DIP-16
1x IC L293D Push-Pull Four-Channel Motor Driver IC DIP-16
1x IC 4N35 Lite-On 4N35 Optocouplers Phototransistor 30V IC
1x Active Buzzer
1x Passive Buzzer
1x Tilt Switch
2x Thermistor
2x Photoresist
5x 1N4733A (5.1v Zener Diode)
5x SPDT Swith
10pcs Button
(6mm*6mm*9mm) with colorful caps.
10pcs 22pf Ceramic Capacitor
10pcs 104 Ceramic Capacitor
5pcs Electrolytic Capacitor (10UF 50V)
5pcs Electrolytic Capacitor (100UF 50V)
5pcs White LED
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED-(Common Cathode)
10pcs Resistor (10R)
10pcs Resistor (100R)
10pcs Resistor (220R)
10pcs Resistor (330R)
10pcs Resistor (1K)
10pcs Resistor (2K)
10pcs Resistor (5K1)
10pcs Resistor (10K)
10pcs Resistor (100K)
10pcs Resistor (1M)
6PCS 2.54mm Colorful Jumper Caps
5V Voltage regulator kit(7805+334 capacitor+104 capacitor)
1 PCS Speicialized DC power JACK for Breadboard.
(PACKAGE 2= Package1+9 V DC power supply adapter)