This auction is for
one Set of 8
Injector Dynamics ID2600XDS
High Resistance, saturated fuel injectors. Injector Dynamics is proud to release the latest X-Series injector, the ID2600-XDS. Like the 1050x, 1300x², and 1700x, The ID2600-XDS is an exclusive development from the partnership of Injector Dynamics and Bosch Motorsport. The ID2600-XDS was developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol. These injectors have the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x. The ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.Nominal Flow Rate – 2600cc/min @ 43.5 psi (3 Bar)
Maximum Differential Fuel Pressure – 130.5 psi (9 Bar) - Requires Minimum 11 volt
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels
Electrical Connector – EV6 / USCAR
Please view the details section below to verify
these are the correct injectors for your
application
Wholesale Distribution
available, contact us and we can create a
special listing for you!
Wholesale Distribution available,
contact us and we can create a special listing
for you!
Description:
Injector Dynamics Dual Slope Matching: Dual Slope Matching is a method of matching injectors that provides the best possible cylinder to cylinder fueling across the entire operating range. Traditionally, injectors were matched based on static flow rate alone, which resulted in large deviations at low pulse widths. Injector Dynamics introduced Slope Intercept Matching over a decade ago, which provided even cylinder to cylinder fueling across the linear operating range of the injector. With the progression of turbo technology, and increased use of alcohol fuels, greater demands are placed on fuel injectors, and they are often required to deliver fuel well outside of their linear operating range. The concept of Dual Slope Matching extends the injector matching into the lower non linear operating range. Dual Slope Matching was conceived by Aaron Looft of Injector Dynamics, who was inspired by the dual slope injector characterization model used by Ford. By approximating the response in the non linear range, and matching sets accordingly, the best possible cylinder to cylinder fueling is realized across the entire operating range. Using the ID2600-XDS as an example, the traditional Slope Intercept method of matching results in an average deviation of +/-5.1% in the non linear range, while the new method of Dual Slope Matching has reduced this to +/-1.4%! In a perfect world, this deviation would not exist at all, but for those of us who live (And tune!) in the real world, Dual Slope Matching represents a large step forward, and we are proud to offer it to the market.
Injector Dynamics Data:Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so it’s no wonder that if you’re tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professional tuner, or an end user, you can spend countless hours getting it “mostly correct” or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability. Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers. Please contact us directly for more details about these new ID2600-XDS injectors including the design process and more specifications.
These Injector Dynamics fuel injectors will
fit many applications, including, but not
limited to:
Specifications:
Typical Flow Rate in CC per minute: 2600cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) Requires Minimum 11volt
Fuel Compatibility – Compatible with
Methanol / Ethanol / All Known Hydrocarbon
Fuels
Electrical connector type: EV6 / USCAR
Injector Body Design: Metal and composite
plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore:
14mm
Diameter or style lower o-ring or cushion:
14mm - GM lower o-ring
All
high performance injectors will
require ECU tuning for proper
performance.
We have injectors
to fit almost every performance application!
Check out our eBay
Store or contact us
|
-IN STOCK ITEMS- Ship no later
than the second business day after receiving cleared
payment.
Pay by 12pm PST and most orders will have SAME DAY SHIPPING!
Due to PayPal and Credit Card policies any item or
combination of items valued over $250 requires a
signature for delivery.
All items paid with PayPal must ship to the address
in the shipping address field in your payment
details as required by PayPal.
If there are any issues fulfilling your order we
will contact you and offer a full refund if there
will be more than 5 days until shipping.
Any item paid for with an echeck through PayPal will
not ship until the money clears, typically 3-5
business days.
We observe all major holidays; please contact us
before bidding if you are unsure of when your item
will ship.
Domestic Shipping Options (Please
note that day one is the day after the item
ships):
-UPS Ground- 1-7 days. Check at www.ups.com for your
location.
-USPS Priority Mail- 1-4 days but no detailed
tracking with this service.
-USPS Express Mail- 1-3 days and more detailed
tracking than priority.
-UPS Next Day Guaranteed- Order by 12pm Pacific Time
to ship the same day for next day guaranteed
delivery!
UPS Ground and USPS Priority Mail
do not have a guaranteed shipping timeframe. If
you need your item ASAP in a guaranteed number of
days we highly recommend upgrading to USPS Express
Mail or UPS Next Day.
International Shipping Services:
-USPS Priority Mail- 6-10 days typical delivery
time, but as long as one month on rare occasions.
BUYER BEWARE - NO TRACKING with this service.
-USPS Express Mail- HIGHLY RECOMMENDED 3-5 days
typical delivery time with tracking, but as long as
2-3 weeks on rare occasions.
-USPS Global Express Guaranteed- 1-3 days
GUARANTEED! (Most Countries, check USPS.com)
If available, this shipping service is listed in
eBay auctions as "Expedited Int'l Flat Rate
Shipping"
Since USPS Priority Mail
International does not have tracking we strongly
recommend upgrading international shipping to USPS
Express Mail or to USPS Global Express Guaranteed.
International Information:
We will ship any part from any auction to anywhere
in the world!
All customs fees are paid by the receiver.
Please research your customs fees with your local
government before ordering so you know what to
expect to pay once the shipment arrives.
We do not lower invoice values since it is a
violation of US and International custom laws.
All international shipments are shipped with the
correct value for the parts shipped.
eBay's NEW Feedback and
Detailed Seller Ratings (DSRs)
If you give us 4 stars, it may seem like a good
score, technically a 4 is "Satisfied", eBay,
however, considers this a low grade. eBay requires
sellers to maintain very high standards to continue
receiving the best pricing, which leads to lower
item costs for the customer. If you were satisfied
with the transaction, please leave positive feedback
with all 5 stars for the DSR ratings.
Please be patient and don't give
negative feedback or below 5 star Detailed Seller
Ratings without talking to us first.
Let us work to resolve your problem so everyone is
happy.
    
Credit card
payments can be made by calling
Due to new eBay policies, sellers are no longer
allowed to accept any other method of payment for
eBay items besides credit card, debit card or
paypal.
This means that TREperformance is not allowed to
accept other payment methods for any item purchased
through eBay.
It is always acceptable to visit our store in person
to make payment and pickup your item at:
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
RETURNS AND EXCHANGES:
We accept returns of unused, uninstalled, brand
new goods, but we must charge a restocking fee of
20% to cover the costs we incur from eBay, Paypal,
shipping, labor, etc. We also must charge a 20%
restocking fee on any order which is cancelled
after payment has been received, even if that
order has not shipped. This is also to help cover
the fees associated with eBay, PayPal, order
processing, restocking, etc. If you would like to
return or exchange an item please email us with
your paypal or authorize.net transaction id # and
the reason for the return or exchange.
No returns are accepted without an RMA number
which is given to the customer by TREperformance
via email. Always have the RMA number clearly
written on multiple sides of the package when you
return the item. If it is not clearly written on
multiple sides of the box it may be returned to
sender. All returns must be received within 30
days of purchase.
ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place
Bid" or "Buy It Now" or "Make Offer" the Buyer
acknowledges that this action shall be treated as
a legally binding "electronic signature," as this
term is defined under federal law in the
Electronic Signatures in Global and National
Commerce Act of 2000. Buyer also acknowledges that
he/she has read this web-page, as well as eBay's
"Rules for Buyers" in there entirety, and has
unconditionally accepted all terms included
therein. Buyer also thereby warrants that he/she
has any applicable legal authority to purchase
this equipment, and that he/she will not use,
sell, or otherwise distribute this item in any
manner in violation of applicable state and
federal laws. Buyer also agrees to indemnify and
hold harmless TREperformance for liability from
any and all claims arising out of Buyer's use,
sale, or other distribution of this item. No
refunds will be given unless the buyer receives
prior written approval from TREperformance, and no
repairs will be provided, nor labor charges
covered by TREperformance in any situation. Seller
reserves the right not to sell to bidders with
excessive negative or "0" feedback.
Contact info:
Email Anytime
Phone and Storefront Hours: Monday - Friday 8:00 AM
- 4:00 PM PST
Mailing,
Shipping & Storefront Address:
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
|
