BCuP-2 PhosCopper Brazing Rod - 0% Silver - Flat - 1/8" x 0.05" x 20"
BCuP-2 PhosCopper Brazing Rod - 0% Silver - Flat - 1/8" x 0.05" x 20"
BCuP-2 PhosCopper Brazing Rod - 0% Silver - Flat - 1/8" x 0.05" x 20"
USES: SÜA
Phos-Copper 0% is a low-cost brazing filler metal suitable for joining copper
to copper & copper to copper alloys where critical impact or vibration
stresses are not encountered in service. It should only be used on assemblies
where good fit-up can be maintained. Application assemblies include heat
exchanger return bends, hot water cylinders and refrigeration points.
BRAZING CHARACTERISTICS:
SÜA PHOS-COPPER 0% is a copper rich, intermediate temperature, brazing filler
metal that is moderately free flowing & self-fluxing on copper (only) by
virtue of its phosphorus content. It liquates slightly more than a 7%
Phosphorus Copper when heated rapidly. Induction Brazing will produce better
mechanical properties in general than torch brazing. Best results are obtained
with joint clearances of .001-.003".
SÜA
PHOS-COPPER 0% liquates (i.e. separates into high & low melting
constituents) if heated slowly through its melting range. The self-fluxing
property of SÜA PHOS-COPPER 0% is effective on copper only. Copper base alloys,
such as brass or bronze, may be brazed with SÜA PHOS-COPPER 0% if the joints
are coated with flux. SÜA PHOS-COPPER 0% should not be used on ferrous metals
or nickel base allows, since the phosphorus produces brittle iron or nickel phosphides
at the joint interface.
PROPERTIES
OF BRAZED JOINTS: The properties of a brazed joint are dependent upon numerous
factors including base metal properties, joint design, metallurgical
interaction between the base metal and the filler metal. Joints made with SÜA
PHOS-COPPER 0% are entirely satisfactory on copper and copper alloys if good
fit-up and adequate shear area are maintained. If poor fit-up prevails, or
shear area is marginal, a lower phosphorus content silver-copper-phosphorus
filler metal may be preferred, particularly if the joints are to be subjected
to impact or vibration in service.
SPECIFICATIONS:
SÜA Phos-Copper 0% alloy conforms to: Unified Numbering System (UNS) C55181 and
American Welding Society (AWS) A5.8/A5.8M BCuP-2
SAFETY: The
operation and maintenance of brazing equipment or facility should conform to
the provisions of American National Standard (ANSI) Z49.1, "Safety in Welding
and Cutting." Individuals requiring further information and Engineering
Specification Documents may wish to contact the Engineering Society for
Advanced Mobility, Land Sea Air and Space, The Society of Automotive Engineers
http://www.sae.org/ (SAE AMS) or The American Welding Society (AWS)
http://aws.org/
DISCLAIMER:
The information and recommendations contained in this publication have been
provided without charge & compiled from sources believed to be reliable and
to represent the best information available on the subject at the time of
issue. No warranty, guarantee, or representation is made by Mundaka
Technologies, Inc. as to the absolute correctness or sufficiency of any
representation contained in this and other publications; Mundaka Technologies,
Inc. assumes no responsibility in connection therewith; nor can it be assumed
that all acceptable safety measures are contained in this (and other publications,
or that other or additional measures may not be required under particular or exceptional
conditions or circumstances.
Other Available SÜA Silver Brazing Alloys:
SÜA - Silver Brazing Solder Wire - 45% - AWS BAg-5 - Size: 1/16" (1, 3 or 5 TOz)
About Us
Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 40 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.
Payment
We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers. We charge 7% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.
Shipping
We ship the same business day for orders placed before 12:00 EST. USPS Priority Mail (1-3 days), FedEx and UPS Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.
Returns
If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.
Disclaimer
Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users. Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals. Mundaka Technologies, Inc. assumes no liability for misuses of this products. Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
