Brake caliper adapters with special hub / hub adapter for vehicles with 5x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, drive with the front 280mm brake disc of the Passat 35i Vr6 with a total height of 29mm on the rear axle.

In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake.

Suitable for the following VW und Seat models:

• Golf MK1 (only with our axle pivot - see item 313 in our shop.)
• Golf MK2 MK3 + GTI+ VR6
• Corrado
• Jetta
• Passat 35i
• Scirrocco
• Vento
• Polo 6N1
• Seat Cordoba
• Seat Ibiza
• Seat Toledo

Advantages of this brake system:

• high deceleration, also in conjunction with our rear axle braking system
• better performance
• supplied material certificate

Technics:

The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.

Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles

For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.

For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers.

Required components:

• brake caliper: Porsche , reference: 996.352.421 + 996.352.422
• rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
• front 280mm brake discs from VR6. Total height: 28,5mm VAG reference : 1H0615301
• brake disc PCD habe to be modified to 4x100 (service available from EPYTEC)

Delivery:

• 2x special hubs / hub adapters with 5x100 PCD
• 2x brake caliper adapters
• high strength mounting screws
• material certificate

• Einfache TÜV Eintragung
• Qualität Made in Germany
• Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
• Weltweit Nr 1 in Sachen Tuning Adapter
• 15 Jahre Expertenwissen
• 10 Jahre Garantie

• Can I also use other brake discs as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: (Link nicht verfügbar)

• Can I also use other brake calipers as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the (Link nicht verfügbar) :