IDEAL Electrical 33-856 VDV Multimedia Voice, Data, and Video Wiremapper and Tester

Product Overview

Features

• Voice/Data/Video LCD based wiremapper verifies cable continuity
• Test results are displayed on the LCD in a pin-to-pin format
• Error types: shorts, opens, miswires, reversals, and split pairs
• For twisted pair, coax, and phone type cables
• Designed for CAT3/5/5e/6/6a cables; RG59/6/6 Quad
• Shield continuity can also be tested on shielded RJ-45 connectors and cables
• In Voice mode, RJ-11/12 port is active; testing similar to Data test, but tests up to 6 conductors instead of 8
• In Video mode, F port is active; coax cables are tested for opens and shorts on pin and shield
• Tone generator with 4 selectable tones
• Tone by pin, pair, or entire cable
• Main remote included, stored in base of unit
• Remote #1 included to terminate far end of cable run

Description

The IDEAL Electrical 33-856 VDV Multimedia Voice, Data, and Video Wiremapper and Tester is an LCD based all-in-one tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the 33-856 VDV is wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends, and if there is end-to-end continuity. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays either "PASS" or "ERROR" after each test, in order to verify if the cable is terminated correctly.

In Data mode, the RJ-45 port tests RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. When the test is activated, VDV checks each conductor of the cable for any opens (terminated, or cut conductors); shorts (cut or nicked conductors that come into contact); miswires (wires out of order, or inconsistent at both ends); reversals; and split pairs (wired correctly, but using the wrong conductor order and grouping). VDV can accurately identify and alert the user to uplink/crossover cables.

For all tests, the included main remote (Remote #1) is used to terminate the far end of the cable run. The main remote is stored in the base of the tester when not in use.

The IDEAL Electrical 33856 VDV has a built-in analog tone generator is also included and can be used in all testing modes. The tone generator has 4 user selectable tones. Toning helps to locate and identify a single cable that is within a bundle of cables. The tone generator has the ability to tone by pin, by pair, or all of the conductors at once. This allows the user to more precisely locate errors within the cable, such as finding opens.

Included Components

• 1 - 33-856 VDV Multimedia Voice, Data, and Video Wiremapper and Tester
• 1 - Built-in Remote
• 1 - Satin RJ11 Patch Cord
• 1 - RJ45 Patch Cord
• 1 - 9V Battery

Terms & Conditions

Please note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.

Domestic Shipping

• FREE Standard Shipping on items OVER $75 and less than 30lbs to continental U.S. Add $36 for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.
• PO Boxes/APOs require USPS shipping and may therefore experience longer lead times
• 6.25% Sales Tax for shipping to MA

International Shipping

• Due to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.
• Please contact us for shipping rates to any overseas U.S. territories.
• International customers are responsible for all shipping charges, including any duties or taxes.