12V Universal fit TRI-colour Charge Warning Light for motorcycles and cars

DON'T GET STRANDED WITH A FLAT BATTERY!

  • Warns of alternator failure, overcharging and a flat battery
     
  • Fully waterproof, high quality, rugged construction
     
  • The toughest and the brightest Tri-colour device available
     
  • One year, no quibble guarantee
 

See what you get before buying by watching the video below.


If the above video doesn't play, please go to YouTube and enter "icmebay" into the search box and pick the Universal fit video.

Drill a 14mm hole and the Charge Warning Light (TCWL) clicks into place. The two wires are both 1m long and should be connected to earth and the output side of the ignition switch or as close as you can get to it. Comprehensive fitting instructions are provided - follow these and you can't go wrong.

Very simple, easy to remember colour/voltage map:-

RED = Undercharging, GREEN = Charging OK, YELLOW = Overcharging

In more detail:-

  • Less than 11.1V = Slow Red flash
     
  • 11.1V - 12.6V = steady Red
     
  • 12.6V - 15.4V = steady Green
     
  • 15.4V - 16.1V = steady Yellow
     
  • Above 16.1V = Eye catching Yellow flash sequence
     

This is the toughest and brightest Tri-colour Charge Warning Light on ebay. And the only one that is encapsulated in ultra durable epoxy resin, making it super strong and genuinely waterproof. It is strongly recommended you watch the video in this listing - as well as seeing all its modes of operation, you also see it surviving heavy blows from a hammer and working fully submerged in water!

Others on ebay are dim and you may struggle to read them in sunlight. The yellow is a true yellow - others display amber which can be confused with red. The wires each have 16 strands of 0.2mm - very tough, very durable but slim enough (1.6mm outer diameter) to easily incorporate into your wiring loom. You can buy cheaper but you can't buy better!

Suitable for cars, motorcycles and all vehicles that have a 12V battery charged by an alternator or dynamo.

Simple to install, simple to use - never be in doubt whether you will be left stranded with a flat battery. Gives peace of mind, is fun to use and looks good.

Hundreds of this model (TCWL) now sold - please check buyers' comments in my ebay feedback. Also, many thanks to the following customer for permission to show his email

"Hi Graham, thanks for the info............. i bought one of these last season for my 2cv race car and its been excellent - saved our ass during the night during the 24 hour race when the exciter wire dropped off the alternator, driver flicked the switch to try the back up regulator but came straight into the pits when it stayed red!!! i am that impressed i have been recommending them to everyone, these two latest are for my bosses rally car collection. once again what a fab product and thankyou. kind regards Ash (jelly snake racing)"


Technical details:- Encapsulated in flame retardant (UL94V-0 standard) epoxy resin. Maximum power consumption @ 15.9V with yellow displayed is 0.49W. Made in UK. Please use the TCWL with a suppressed ignition system. Unsuppressed may affect the operation of the TCWL and is anti-social as it causes picture breakup on TVs in some of the houses you go past. Not suitable for Lithium batteries.

Click on "See other items" for RED Universal fit CWL. And also CWLs that power your choice of bulb or LED. These allow you to maintain a completely original look if you already have a warning light fitted.


Items are posted on Mondays and Thursdays at 11am