The more, the merrier! The more you buy, the lower price per piece you got! Choose your own pack Lacquer of unique metallized, glitter effect. Used by tuning fans for cars, motorbikes, bicycles, models of cars and airplanes, metal stands, caps, tool cases. For surfaces such as metal, stone, wood, and some plastics.  Notice: For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use Plastic Primer DECO COLOR previously. Best result when applied at 10-25°C. For additional protection you should use Acryl Car Line clear by DECO COLOR. Apply before painted surface become dry. Unique metalized, glitter effect Very good covering Short drying time: 10-15 min Touch dry: 30-40 min; Hardened: 24 h Efficiency 1,5-2 m² depending on colour and type of surface by one application Weather condition and abrasion resistance Petrol resistance 7 most common colours Please notice colour of lids shown on listing may be little different For indoor and outdoor use Capacity 400 ml (Available in 4 colour for being suitable background) If you would like to protect surface you painted more, apply 1K ACRYL CAR LINE CLEAR COAT REMEMBER TO APPLY 1K ACRYL CAR LINE CLEAR COAT WHEN METALLIC GLITTER IS STILL WET! THAT'S VERY IMPORTANT TO ACHIEVE BEST FINAL RESULT! Usage: Before applying read carefully instructions on the container and use according to the manufacturer’s recommendations. Recommended substrate conditions: Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600). Method of use: Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds. REMEMBER - BUY ONLY ORIGINAL AND PROVEN PRODUCTS FROM THE ONE AND THE ONLY EXCLUSIVE DISTRIBUTOR OF DECO COLOR aerosol line IN UK AUTHORIZED SUBSIDIARY COMPANY - POKO LIMITED If you are looking for more - visit our other ebay offers!    |