------------This is a awesome throttle setup and has 70 inches of wire attached with brass male 2.6mm ends inside of a 6 pin connector and I Supply the opposite 6 pin connector and female Brass ends to install it onto anything variable speed has a 5 wire connection------------Comes with directions and phone and text support -------------Plugs directly into any of our 24volt controller and throttle kits, if you already bought a kit from us.

Upgrade your throttle on your electric scooter or e bike with this 24 volt 5 led with key which is a much better way to monitor your battery and keep it safe with a key!!.

This throttle comes with a convenient 5 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip.

Installation instructions. 

Three wires (red=5V from controller, black=ground, green=5v signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and blue) are a switched 24v and provide the level for the LEDs.Which would hook up for your on/off switch which is normally power locks..