New line of unique decorative paints with satin-matt finish. Universal synthetic solvent-based paint for surfaces made of metal, wood, ceramics, glass, wicker, cardboard, fabrics, fresh and artificial flowers, and some plastics.
Wide range of application hobby and professional works: at home, garden, automotive and industry.

Interested in high gloss multi purpose colours? Check our DECORATION LINE 


Notice:
For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use 
Plastic Primer DECO COLOR previously. Best result when applied at 10-25°C. 

Satin finish of painted surface
Very good covering
Short drying time: 10-15 min
Touch dry: 30-40 min; Hardened: 24 h
Efficiency 1,5-2 m² depending on colour and type of surface by one application
High resistance to abrasion and weather conditions 
Variety of colours: 20 most popular colours in RAL system 
(*Please notice: white RAL 9016)
For indoor and outdoor use
Capacity 400 ml

For better adhesion, to improve covering and to increase resistance of painted surface we advise you to use
our Anticorrosive Primer previously. (Available in 4 colour for being suitable background)
In such way you can achieve much more better final result!

Usage:
Before applying read carefully instructions on the container and
use according to the manufacturer’s recommendations. 

Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).

Method of usage:
Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.


REMEMBER - BUY ONLY ORIGINAL AND PROVEN PRODUCTS
FROM THE ONE AND THE ONLY
EXCLUSIVE DISTRIBUTOR OF DECO COLOR aerosol line IN UK
AUTHORIZED SUBSIDIARY COMPANY - POKO LIMITED

If you are looking for more - visit our other ebay offers!