 Universal synthetic solvent-based paint for painting surfaces made of metal, wood, ceramics, glass, wicker, cardboard, some fabrics, fresh and artificial flowers, and only some plastics. Wide range of application hobby and professional works: at home, garden, automotive and industry. Especially practical for works of art and decoration. Easy to use. High gloss finish! CHOOSE YOUR COLOUR FROM THE LIST Interested in satin/matt finish? Check out also our new trendy Decoration_matt line Notice: For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use Plastic Primer DECO COLOR previously. Best result when applied at 10-25°C. Whole range in gloss. Gold and Aluminium in satin finish Black and White in both: gloss and matt finish Very good covering of painted surface Short drying time: 10-15 min Touch dry: 30-40 min; Hardened: 24 h Efficiency 1,5-2 m² depending on colour and type of surface by one application High resistance to abrasion and weather conditions Variety of colours: over 30 most common colours in RAL system For indoor and outdoor use Capacity 400 ml For better adhesion, to improve covering and to increase resistance of painted surface we advise you to use our Anticorrosive Primer previously. (Available in 4 colours - choose your suitable background) To achieve additional protection of painted surface use as a top coat RAL 0000 Transparent from same line. In such way you will achieve best final result! Usage:
Before applying read carefully instructions on the container and use according to the manufacturer’s recommendations.
Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).
Method of usage:
Apply product at temperature about 10-25°C (optimum temperature for good
varnish drying). Drying time depends also on air humidity and product density.
Painting should be made in well ventilated room. Prior to commencing painting,
shake the container for about one minute, which will help mix the varnish by
the ball found inside. Perform the test spray. Apply the varnish with few thin
layers rather than one thick layer, from the distance of 25-30 centimetres.
Following applying each layer, wait a few minutes. Following the completion,
clean the nozzle. Put the container upside down, pressing the nozzle for the
period of three seconds. REMEMBER - BUY ONLY ORIGINAL AND PROVEN PRODUCTS FROM THE ONE AND THE ONLY EXCLUSIVE DISTRIBUTOR OF DECO COLOR aerosol line IN UK AUTHORIZED SUBSIDIARY COMPANY - POKO LIMITED If you are looking for more - visit our other ebay offers!   |