The STANLEY SmallCraft
DENGEMARSH 12 Open Canoe
 

You could build this canoe in just a few hours a day for a week!!
(Plus painting and varnishing time)

You will receive printed DIY Plans, Instruction Manual with A3 drawings or choose Full Size Patterns option
Plus FREE email/text/phone help throughout your build.

Plans Option 1 - Printed package containing A3 workshop plans, A3 Drawings and full instructions


Plans Option 2 - Printed package containing large paper sheets of full size patterns for the Bottom, Side Planks, Bulkheads & Decks and full instructions 
(The full size patterns make it quicker and easier to get the panel shapes onto the plywood for cutting out.)


The Dengemarsh 12 specification

Length 12' - 6" (3.81m)

Beam 2' - 9" (0.84m)

Depth (midships) 1' - 0.5" (0.32m)

Height fwd/aft 1' - 7.5" (0.49m)

Weight (approx.) 44lbs (20kgs)

Crew 1 Adult (Plus 1) 

An open “Canadian” style canoe along the lines of our popular Peasemarsh design but with an additional plank each side.There is optional buoyancy fore and aft with a bulkhead enclosed with a flush fitting deck. The bulkheads can be fitted with small hatches for storage of valuables etc while on the water.
It goes together easily and quite quickly and once completed, looks good and gives good performance on the water.Designed to be paddled with 1 adult  or 2 children while kneeling but a seat(s) could be fitted.The plans package contains the full size patterns paper templates for the planks, bottom, bulkheads and decks, full instruction manual and materials information.

Basic Materials Required 

2 x 6mm x 2.44m x 1.22m, 
3kg Epoxy pack, 
2ltr Fillet Additive,
25m x 100mm wide F/G Tape, 
50-100 4.8mm x 300mm Cable Ties


Free UK delivery

PLEASE NOTE.

In the case of any strike action by Royal Mail, we will use other options to get your order to you.



Any questions?
Contact us. Details under business seller information or use ebay system.

Please Note - we are still dispatching plans as normal but delivery may take a day or two longer wih current situation.



About Us - STANLEY SmallCraft

We've been doing what we do for 35 years now designing and building small boats plus producing DIY plans and quality kits allowing you to build your own boat.

We don't just leave you to get on with it either. We are available by email/text/phone/even WhatsApp to assist you if you get stuck or help you with customising your boat with your own ideas.


Whatever you are looking for, DIY canoe building plans, DIY dinghy building plans, build materials or perhaps some chandlery for your boat, we can help by either supplying it or pointing you in the right direction. 

​

We can help and advise you with your own project too and even cut it for you.

​

A lightweight plywood dinghy or canoe makes for an easier and cheaper, boating experience.

In the 8' to 10' range of boats, fibre glass dinghies, moulded plastic canoes and inflatables are all heavy and/or cumbersome. They require trailers to move them about on land and larger powered outboard motors to move them on the water. Some canoes can be carried on a roof rack but are heavy to lift up there and carry to the water.

​

Our plywood dinghies and canoes are designed to be lightweight, sometimes half the weight. A 10', 12' or 14' plywood canoe can be easily carried on a roof rack and can often be put up there solo as can an 8' dinghy. 10' dinghies and larger canoes will probably need two to move them about more because of size than weight.

Being lightweight, crew distribution is important to keep the boat balanced. They only need small, lightweight outboard motors which also helps to keep costs down.




.