Up for sale is a used SONY XCI-V3 Monochrome VGA Progressive Scan Smart  Camera with an installation of Windows XP Embedded.

 It has been tested and is in great working condition.

Lens or other accessories are not included.

 

Original Manufacturer Description:

The XCI-V3 offers high-speed acquisition with VGA resolution.

The XCI-V3 is a complete PC with a high-end CCD camera in a small, networkable  package. It incorporates a 1/3-type VGA B&W progressive scan CCD, a high  performance AMD Geode GX533 processor, 256MB SDRAM and comes with a choice of  Linux® or Windows® XPe operating systems.

• SENSOR BLOCK Image device 1/2-type progressive scan
• IT monochrome CCD Effective resolution (H x V)
• 640 x 480 (VGA)
• Cell size (H x V) 4.65 x 4.65 µm
• Frame rate 60 fps
• Gain control Manual (0 to +18 dB, 1 dB steps)
• Electronic shutter 2 to 1/50,000 s (trigger mode), 2 to 1/100,000 s (free  run mode)
• Binning function Vertical / Horizontal binning
• Partial scanning function
• Vertical random scanning 32 to 1,024 lines, 32 line steps Horizontal random  scanning 384 to 1,280 pixels, 128 pixel steps
• Typical frame rate 34 fps (VGA), 21 fps (XGA)
• External trigger input pulse-edge detection mode/pulse-width detection mode
• Trigger delay function 0 to 4 s, 1ms steps
• External trigger latency less than 10 us
• Hardware Look Up Table
• Gamma compensation, binarization, negative/positive reverse, etc.
• PROCESSOR CPU x 86, AMD Geode GX533, 400 MHz Memory 128 MB DDR-SDRAM 128 MB
• Compact Flash Operating systems
• Ethernet 10Base-T/100Base-TX (Network protocols: TCP/IP (IPv4), HTTP, FTP)
• Monitor output D-sub 15pin for multi scan monitor
• USB version 1.1
• Serial interface RS-232C
• Digital I/Os TTL IN/OUT, Isolated IN/OUT, Trigger IN, Exposure OUT
• GENERAL Lens mount C-mount Minimum illumination 4 lx (F1.4, +18 dB gain)
• Power consumption 7.8 W
• Power requirements 10.5 to 26.4 V
• Dimensions (W x H x D) 55 x 55 x 110 mm (2 1/4 x 2 1/4 x 4 3/8 inches)
• Mass 400 g (14 oz) Operating temperature -5 to +45 ºC (23 to 113 ºF)
• Storage temperature -30 to +60 ºC (-22 to +140 ºF)
• Operating humidity 20 to 80% non condensing
• Storage humidity 20 to 95% non condensing
• Vibration 10 G (20 to 200 Hz)
• Shock resistance 70 G Regulations FCC / CE / IC / VCCI Class A