Please measure the thickness of your dial!  Threaded shaft is 1/2" so your dial cannot be thicker than 3/8" 

Repair or update your clock with this replacement kit.  Or use this kit if you want to make a DIY clock you designed.  MESSAGE ME FOR WHOLESALE PRICES.  And please contact us if you have any problems with our kit/s before you leave a negative feedback, so we can resolve it.  Please read the details carefully or ask questions if you need to, to ensure you get the correct kit for your project.  

DETAILS: Motor

Motor model: Quartz  OK888

Total shaft length is 3/4"

Threaded shaft is 1/2" so your dial cannot be thicker than 3/8" 

Motor size: 2 2/16" x  2 2/16"  x  5/8" case thickness

Threaded shaft diameter: 7mm/1/4".  So make your hole in your dial 3/8" diameter

Motor type:  Push-on-hands, does not require a nut to hold hands on the shaft

Requires one "AA" battery (not incl.)

Includes all mounting hardware; brass washer, second hand cap nut and hex nut.

Continuous sweep motion, no stepping of gears, and ultra quiet.

We will replace motor if it is defected!  Just follow instructions in the kit.

DETAILS:  Hands

Metal hands that can be painted any color... use a primer then color coat

Hands can be cut down to a size using any household scissor

Minute hand:  From the center hole: 5 3/4"

Hour hand:  From the center hole: 3 3/4"

Second hand:  From the center hole: 5"

Both the hour and minute hands have a circular hole for the motor's shaft, not oval or rectangular

HANGER:

MEASURE:  2 1/2" X 3/4"

HOLE:  9/16"