ICOP 6019 VGA/LCD

Mity-Mite VGA/LCD Development Kit

Chipset: 

TOPRO TP6508IQ Chip

16-bit ISA bus

Panel Data bus: 24-bit

Display: CRT and Flat Panel Mono/TFT/DSTN/LCD

Video Memory: 512KB on board Resolution Up to 640x480 @ 256 colors

(Optional 1MB on board, Resolution up to 1024x768 @256 colors)

VGA BIOS Socket x1

Display Connector: 

10-pin (2.0mm) box header VGA connector

44-pin (2.0mm) box header for LCD connector

4-pin (2.0mm) power connector for +5V/+12V

Expansions: 

Specific ISA bus signal interface

Power Requirement: Single Voltage +5V @200mA

Operating Temperature: -20~+60¢XC operating temperature

Dimensions: 80mm (L) x 50mm (W)

Ordering Info: Mity-MiteVGA/LCD Development Kit

Chipset: DM&P (ALI) M6117D Embedded CPU386SX-36MHz compatible

Data Bus:16-bit

Bus Speeds: 8MHz, programmable up to 16MHz

Watchdog Timer: from 30.5£gs to 512 seconds

Real Time Clock with Lithium battery backup.

BIOS: AMI BIOS

RAM: 2MB on board

On board Ethernet: Realtek 8019AS single chip

Full-duplex transfer mode, doubles effective bandwidth NE2000 compatible with built-in 16KB RAM buffer

Throughput: 10 Mbps

I/O:

One RS232 port

One 44-pin Enhanced IDE interface

16-bit GPIO

Power LED

Active LED

OS:

With DOS pre-installed

SSD:

Support Built-in Flash Disk up to 350KBOr support MicroDiskModule through IDE interface from 4MB up to 256MB

Connector:

20-pin(2.0mm) box header for 16-bit GPIO

10-pin(2.0mm) box header for RS232 port

5-pin header for AT-keyboard

2-pin MOLEX power connector

2-pin connector for speaker

RJ-45 connector for 10 Base-T

Expansions:

Specific ISA bus signal interface

Power Requirement: Single Voltage +5V @400mA

Operating Temperature: -20 ~ +60¢XC operating temperature

Dimensions: 80mm (L) x 50mm (W)

Ordering Info: Mity-Mite Module