|
This auction is for a BRAND NEW, Accufab Polished
Ellipse Throttle Body for 1996-1998 Mustang Cobra, Mustang Bullitt & Ford Triton 6.8L Modular V10 , part number CTB96-98.
Accufab's elliptical throttle body is designed to be
used on the 1996-1998 Cobra and 2001 Mustang
Bullitt. Their quest for achieving high performance
coupled with the quality of this product is bound to
show great results in your application. Dyno tests
on a stock vehicle show a 5hp to 7hp gain. The stock
twin blade flows 1089 cfm compared to Accufab's
single blade which flows 1284 cfm. Minimum
modifications to the intake manifold need to be made
in order to accommodate the single blade. Accufab
manufactures a Special Cobra Throttle body
specifically for cars making 550hp+ or KenneBell
Supercharged vehicles. That throttle body is the
SCTB96-98 which flows 1696 cfm. Horsepower gains
vary depending on your vehicle modifications. Gasket
and TPS screws included.
Wholesale Distribution
available, contact us and we can create a
special listing for you!
Wholesale Distribution available,
contact us and we can create a special listing
for you!
This Throttle Body
will fit all of the following vehicles:
1996-1998 Ford Mustang Cobra
2001 Ford Mustang Bullitt
Ford Triton V10 Modular Engines
Feel the Power. Replace your Ford Mustang
Cobra's restrictive stock throttle body with
this top of the line Elliptical or Oval blade
unit from Accufab and get your 4.6L the air it's
been lacking. This upgrade will greatly improve
your Cobra or Bullits throttle response, and
horsepower. It is the perfect starting point for
future modifications.
Better Air Flow for More Power. Available in
Elliptical or Oval blade. The first throttle
body is our standard ELLIPTICAL single blade
which flows 1284 cfm compared to the stock twin
blade design which flows 1089 cfm. Dyno tests on
a stock vehicle show a 5 to 7 hp gain.
The second throttle body is our special OVAL
single blade and it flows 1696 cfm which is an
additional 607 cfm over stock. However, we
manufactured this throttle body specifically for
engines making 550hp+ or using a KenneBell
supercharger. Horsepower gains vary depending on
your vehicle modifications.
The standard elliptical blade (1284 cfm) is
shaped like an egg. The oval blade (1696 cfm)
has top and bottom edges that are completely
straight and the blade is only rounded on the
ends.
Exceptional Quality. Accufab's quality is second
to none - this throttle body is CNC machined
from 356 billet aluminum, and the exterior is
polished to an eye-catching finish. The shafts
are also CNC machined from stainless for
durability and quality, with brass blades and
the highest quality bushings, bearings and
screws. Manufactured in the USA.
Application. These Accufab Throttle Bodies are
specifically designed for use on the 1996-1998
Ford Mustang Cobra and 2001 Ford Mustang
Bullitt.
Technical Notes. Please note: The stock intake
manifold needs to be modified in order to
accommodate the single blade. There is a bridge
of material that needs to be ground away for the
blade to clear. This usually takes about 10
minutes.
Accessories Included. Each throttle body
includes one throttle body gasket and TPS
mounting screws.
We have throttle bodies to fit almost every
performance application!
Check out our eBay
Store or contact us
|
