This is all the information that you will need to verify that each frame dimension is correct on your 1938 Willys Model 38. This particular diagram does not give you numbers to verify measurements, it describes an old school method of verifying that a frame is correct. Whether you are doing a frame off restoration, replacing rusted out body mounts, correcting your front end alignment or just trying to align the doors on your car this information is invaluable. Should the unthinkable happen and your car is in a serious accident you will have all the information that you need to repair it back to the NOS dimensions. You will also receive the detailed measurements needed to verify that your car’s pitman arm and steering knuckle and arms still meet the NOS dimensions that they had when your car left the factory. Included is the information need to properly set the caster, camber and toe in on the front suspension along with the king pin inclination. As a added bonus you get the procedures for removing the radiator grille and the radiator core along with information on the front and rear springs. The numbers have been erased on the images shown on the auction, what I will send you is a copy of the diagrams with all the numbers listed that is enlarged to an easy to read 11 X 17 sheet of paper. CH-196, CH-197