Mould Removal and Prevention Kit Includes HG Mould Spray and Mould Stopper Spray
Mould Removal and Prevention Kit Includes HG Mould Spray and Mould Stopper Spray. HG Mould Spray effectively removes all black and brown stains caused by mould, fungus, moss and algae inside and outside. HG Mould Spray bleaches grey and black mould spots and green algae spots.
These unsightly black or brown marks are found on the silicon seal between the bath tub and edges of tiles, on the shower cubicles and on plaster. For cleaning tiled walls, (also suitable for marble) and grouting in the bathroom, toilet, kitchen, cellar, basement, sauna, garage, shed etc. It also cleans facades, balconies, plant boxes and garden ornaments but NOT wood.
Size: 500ml
Inspired Mould and Mildew Stopper is ideal for preventing mould and mildew build up from most surfaces.Inspired Mould and Mildew Stopper penetrates the surface and creates an invisible layer that prevents the growth of toxic and harmful spores.
Inspired Mould and Mildew Stopper is also ideal for use on outdoor areas prone to mould and mildew build up such as conservatories, roofs, guttering etc.
+ Prevents mould and mildew build up
+ Creates an invisible layer that prevents growth of harmful spores
Made in the UK
Size: 500ml
Usage Instructions (HG Mould Spray): The product has a bleaching action. If in doubt first test on an inconspicuous area or a discrete place. Do not remove fungi and algae, but remove moss layers before using the product. This product has a child saftey spray nozzle. Press on top of the nipple at the front of the pump and turn a quarter (STREAM or SPRAY). Spray the surface from 3-5 cm distance and leave it to work for 30 minutes.
In the case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with a sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and treated again.
Turn the nipple a quarter backwards after use into the safety position. For cleaning large surfaces with green deposits we advise using HG Moss Algae Remover.
Dosage: 500ml of Mould Spray is suitable for 2-3 square metres of wall surfaces, 6-8 square metres of tiled floors.
Attention: Ventilate well during use. Wear rubber / plastic gloves. Prevent splashing on clothing, (high) gloss paint and laminated blinds. Rinse with water immediately in case of contact with skin, clothing and sensitive surfaces. Avoid contact with metals and do not treat coloured surfaces. We do not recommend using this product on artexed ceilings.
In elastic grouting (for instance silicone paste) sometimes some permanent brown discolouration may occur after use. In badly glazed tiles and old tiles with hairline cracks brown discolouration may appear. This brown colour can be removed with Hypo (Sodium Thiosulfate) which can be obtained from Homecare Essentials - please contact us if required.
Inspired Mould and Mildew Stopper Usage Instructions:
1. Ensure the area to be treated is completely clean and dry.
2. Spray evenly onto the surface to be treated and leave to dry.