ANCEL V3 Elite Fit for BMW/Mini/Rolls-Roce Scanner , Bi-directional Full Systems Scanner
Ancel V3 Elite Features
💹Dual Diagnostic Modes--OBDII Cable daiagnostic & Bluetooth diagnostic via Android & iPhone ;
💹Bi-directional control test
💹 Full System Diagnostic
💹Vehicle Support : Fit For BMW/MINI/ROLLS ROYCE
💹Active Test
💹40+ Maintenance Functions
💹5.5-inch IPS multi-touch capacitive touchscreen with 1280*720 resolution
💹Save and Playback of Data Stream
💹Diagnostic Feedback
💹Screenshot and Recording
💹Sharing of Diagnostic Report
💹Diagnostic History
💹Upgrade of System Software, Diagnostic Software, and Firmware Software
💹 13 Languages :English ,German ,Spanish ,French ,Polish ,Italian ,Portuguese ,Russian ,Czech ,Dutch ,Japanese ,Swedish ,Korean
Technical Specifications
Processor： A133 ARM Cortex-A53,Quad Core at 1.5 Ghz
GPU：IMG PowerVR GE8300
Operating System：Android 10
Memory ：2GB LPDDR4 RAM & 32GB EMMC ROM
Display ：5.5 inch IPS Multi-touch Capacitive Touch Screen with 1280*720 resolution
Connectivity ：Wi-Fi : 802.11 b/g/n/ac Support Hot spot/ 2.4/5GHz
💹Bluetooth: 5.0
💹Type-C
Audio Input/Output
💹Input: N/A
💹Output: buzzer
Input Voltage：8V – 30 V
Power Consumption：Approx. 800 mA (Screen on with default brightness, Wi-Fi on) @3.7 V
Operating Temp：-10 to 50 °C (14 to 122 °F)
Storage Temp：-20 to 60 °C (-4 to 140 °F)
Operating Humidity ：5% to 95% non-condensing
Dimensions ：(W x H x D) 201 mm(7.91 in) x 118 mm(4.65 in) x 34 mm(1.34 in)
Weight：NW: 370 g (0.82 lb)
Protocols：ISO9141-2, ISO14230-2, ISO15765, K/L-Line, SAE-J1850 VPW,SAE-J1850PWM, ISO11898 (High-speed,Middle-speed, Low-speed and Single-wire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1708
Package List:
1* ANCEL V3 Elite BMW Multi-System Scan Tool
1*User's Guide
1*USB Cable
1*Nylon Carry Pouch
Bi-directional Scan Tool/ Active Test
Bidirectional scanner allows you to use the scan tool temporarily activate or control a vehicle system or component and to check of the electronic components such as switches, sensors, relays, and actuators.
Fit for example, if "Press Brake Pedal" displays, you have to press and hold the brake pedal and then continue. The sequence, number and type of tests are dictated by the control module.
- Auto Bleed Test/ Automated Bleed
- ABS Pump Motor Test
- Fuel Injector Pump/ Fuel Trim Reset
- Window/Mirror/ Door Lock/ Horn
- Cycle A/C Clutch On/Off
- Air Conditioning Test
- Wiper Test
- Interior & exterior lights Test
- Sound horn Test
- Brake Bleed Preparation Test + ABS Manual Control Tests + Fuel Composition Reset + EVAP Test + Idle Relearn + Injector Buzz Test + Pump and Value Tests + VGT Turbo Calibration......
40+ Special Maintenance Functions
Oil Light Reset
SAS Steering Angle Reset : Reset the steering angle to zero to keep the car running straight.
Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity. -For gasoline or diesel 12V vehicle.
DPF Regeneration- Only for diesel 12V vehicle.
ABS Bleeding : Help exhaust the air.
Throttle Matching: Initialize the throttle actuators to the default state.
TPMS Reset: Reset the tire pressure.
EPB Reset : Help replace and reset the brake pad.
A/F Set: Set or learn Air/Fuel ratio parameters.
AFS Headlamp Reset: Initialize the adaptive headlamp system.
Sunroof Initialization: Initialize the sunroof when locked off or closed.
Battery Reset : Register the battery after replacement.
Seat Calibration: Calibrate the memory in replaced or repaired seats.
SRS Light Reset: Resets the SRS data to clear the SRS collision fault indicator.
Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
Transport Mode: Deactivate the transport mode.
Windows Calibration: Perform door window matching to recover E*CU initial memory.
Suspension Reset: Adjust the vehicle body height sensor for level calibration.
NOx Sensor Reset: Reset catalytic converter learned value stored in E*CU.
Stop/Start Reset: Set up the automatic start-stop function in E*CU.
Coolant Bleeding: Activate the electronic water pump.
Suspension Reset: Adjust the vehicle body height sensor for level calibration.
EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.
IMMO K-ey : the unique car K-ey programming and read pin code function, is mainly used to disable the lost vehicle K-ey s and program a new replacement K-ey fo-b.
AT SET
HEADLIGHT
SUSPENSION
SUNPROOF
PUMP START
TRANSPORT
DOOR&WINDOW
UREA SET
NOX SET
SEAT SET
AND MORE...
OE-Level Full System Diagnostic
The automotive diagnostic scanner V3 Elite , being capable of doing the OE-Level full system diagnostics, any problems that can damage your car are not allowed to hide. After numerous tests, we are sure that diagnostics done by V3 Elite are as same deep and complete as the OE diagnosis tool of car makes.
Full System Diagnostics: The V3 Elite is able to diagnostic systems include but not limited to the following systems
(Both auto scan and individual module scan are supported):
Drive: Motor Electronics/ISM-Shift Module/Transmission Control/Exhaust System/Fuel Pump
Chassis: Electric Stability/AMF Drive Unit/Adaptive Damping System/Electric Power Steering/Multifunction Steering Wheel
Body: Supplemental Resistance System/Central Gateway/Electronic Ignition/Steering Column Module/Multifunction Control Unit/Sunroof/Tailgate Control/Weight Sensing System/Headlamp/Rear signal acquisition and actuation module/Trailer recognition module/ Seats and Doors/ Adaptive Directional Headlights/ Convertible Top Module/ Light Switching Center
Information and Communication: Instrument Cluster/Rear Entertainment System/Navigation/Audio/Sound/Multifunction Camera/Digital Audio Broadcasting/Drive Kit Fit for iPhone/Radio/Diver Assistance System/Park Distance Control
OE-Level Diagnostics: The scanner V3 Elite can diagnose cars comprehensively and fully without resorting to any other equipment or consulting high-end technicians Fit for guide. The functionality is advanced and complete while the operation process is quiet easy.
Quickscan Diagnostics: You can read the codes, live data and clear the codes in just a few seconds of each individual module. If you choose auto-scan, the whole system diagnosis could be done within just 15-20 seconds.
OBDII Code Reader Fit for all car.
●Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.
●Reseting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.
●Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
●Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
●On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
●O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results Fit for the most recently performed tests from the vehicle’s ●on-board computer. (Note:If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by vehicle)
●On-Board Monitor Test: Retrieves and displays test results Fit for emission-related powertrain components and systems.
●Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
●I/M Readiness Shows whether the various emissions-related systems on the vehicle are operating properly and are ready Fit for inspection and maintenance testing.
Vehicle Support
Fit for BMW:
Am Sep 17, 2026 hat der Verkäufer die folgenden Angaben hinzugefügt: