Description
This microphone is sensitive electronic equipment — please avoid dropping or knocking it.
If the microphone is placed too close to a speaker, it may produce feedback (whistling). To prevent this, move the microphone away from the speaker or reduce the speaker's volume.
Changing the pickup mode switch while the microphone is on may generate noise.
When you turn the microphone on, the battery indicator will flash briefly and then turn off. This is normal — it saves battery power and prevents unwanted light from affecting video recordings. To confirm the microphone is off when not in use, simply check the position of the power switch.
When the battery is sufficiently charged, the power indicator will flash once when the microphone is turned on. If, during use, the power indicator lights up continuously when you switch the microphone on, this means the battery is low. Even so, you can still expect around one to two hours of use — but we recommend replacing the battery soon after.
Features
Type: Microphone
Material: ABS Plastic
Size: 13.5 × 3 × 5.5 cm
Cable Length: Approx. 20 cm
Colour: Black
Frequency Response: 30–15000 Hz
Sensitivity: -40 dB (0 dB = 1 V/Pa at 1 kHz)
Pickup Pattern: Unidirectional (Single Directional)
Output Impedance: ≤200 Ω
Signal-to-Noise Ratio: 76 dB (1 kHz at 1 Pa)
Maximum Sound Pressure Level: 120 dB at 1 kHz (≤1% THD)
Power Supply: 3V DC (CR2 lithium battery)
Battery Life: Approx. 800 hours (at room temperature with included CR2 lithium battery)
Connection Type: 3.5mm microphone jack
Compatibility: Works with any DSLR camera that has a 3.5mm microphone input and a standard hot shoe mount
Important
This is a monaural microphone, designed to clearly record a single mixed audio channel. It is ideal for personal speaking, live streaming, voiceover work, and one-to-one interviews — essentially any situation where you only need to capture sound from a single primary source. However, it is not suitable for more complex setups such as recording multiple audio tracks separately or capturing true stereo sound. Please check your use case and requirements carefully before placing an order.
To prevent the battery from draining during transit, we've placed a paper tab between the battery and the contacts. Please remove this paper before use.
How to Use
Slide the adapter onto the camera's hot shoe mount to attach the microphone.
Ensure the camera is turned off, then connect the microphone's L‑shaped 3.5mm stereo plug to the camera's microphone input port.
Notice
Camera is not included.
Actual colour may vary slightly from the images due to lighting and monitor settings.
Please allow 1–3 cm variation in size due to manual measurement.
Package Includes
1 × Microphone
1 × Battery
1 × User Manual