Product Features:

Extended lens design with a flexible lens tube that can be freely adjusted to suit various installation locations;

High-definition Wi-Fi monitoring with real-time remote viewing via the app;

Supports memory card expansion for playback of recorded footage;

Features motion detection that sends push notifications when movement is detected;

Built-in 2000mAh high-capacity battery provides 6–7 hours of use on a full charge;

Simple connection and quick setup—no complicated configuration required.

Product Specifications:

Material: Plastic, Silicone

Main Unit Dimensions: 6.6 × 4.3 × 3.2 cm

Hose Length: 20 cm

Total Length: 26.6 cm

Functions: Security monitoring, video playback

Advantages: Extra-long lens hose, extra-large battery

Connection Method: 2.4 GHz Wi-Fi

Motion Detection Alerts: Yes

Night Vision: No

Storage: Supports 32GB TF card (not included)

Built-in Battery: 2000mAh

Battery Life: Approx. 6–7 hours

Charging Time: 12 hours

Charging Indicator: Yellow light on during charging; green light on when fully charged (lights up when the camera is on during charging; no light if the camera is off)

Setup (Connection) Steps:

Insert a formatted memory card and download the compatible app on your phone (available in the user manual) --- Turn on the camera after it is fully charged --- Once the camera starts up successfully, the red indicator light will remain on and the blue indicator light will flash --- In your phone’s Settings, find the camera’s Wi-Fi hotspot signal (starting with “BK---”) in the Wi-Fi list, tap it, and connect --- Open the compatible app, pull down to refresh, and the camera will automatically be added to the app --- You can change the camera’s password according to the prompts (Be sure to remember it after changing) --- Tap Settings, then Wi-Fi Settings to connect to the internet --- Find your 2.4 GHz Wi-Fi network (5 GHz and dual-band Wi-Fi are not supported), enter the password, confirm, and wait for the connection --- The camera will restart; the blue indicator light will flash rapidly during connection --- The camera has successfully connected to the internet; the blue indicator light will now remain steady --- Configure other features in Settings

Frequently Asked Questions:

1. Memory card not recognized—Please ensure you are using a memory card with a capacity of 32GB or less, and format it on a computer before inserting it into the camera. If it is not recognized on the first try, try inserting and removing it a few times; it is usually recognized normally.

2. The camera cannot connect to the internet—If the camera fails to connect after following the setup steps and the indicator light shows no change, please check if the camera has sufficient battery power. We recommend fully charging it or connecting it to a power source via the charging cable before trying again. It may also be a Wi-Fi issue; ensure you are connected to a 2.4 GHz Wi-Fi network, that the password is correct, and that the camera is placed close to the router.

3. Unable to view live feed after disconnecting from Wi-Fi on your phone—Please check the app’s permission settings and ensure that the “Mobile Data” permission is enabled (allowing the app to access the internet via mobile data).

4. Regarding the charging indicator light—When the camera is powered on and connected to the charging cable, a yellow indicator light will illuminate. When fully charged, a green light will appear. If the camera is turned off during charging, no indicator light will be visible, but the camera will still charge normally.

Package Contents:

WiFi Camera x1

USB Charging Cable x1

User Manual x1

Card Reader x1

32GB Card x1(Optional)