Note: This product is brand new and unused. According to Chinese regulations, all products must be activated before delivery, so you will receive an activated but unused product.
📷 DJI Mavic 4 Pro Electronic ND Filter eND 4‑64 — World's First Consumer Drone Electronic Variable ND
ND4–ND64 (2‑Stop to 6‑Stop Continuously Adjustable), Triple‑Cam Sync, Hasselblad "H" Mark, 5.3 g, Auto & Manual Mode
✅ Compatible Products
- DJI Mavic 4 Pro
📦 In The Box
- 1 × DJI Mavic 4 Pro Electronic eND 4‑64 Filter
- 1 × Hard‑Shell Protective Case
- 1 × Microfiber Lens Cleaning Cloth
🔍 Product Overview
The DJI Mavic 4 Pro Electronic ND Filter (eND 4‑64) is the world's first OEM electronic variable ND filter for a consumer camera drone.
Designed exclusively for the Mavic 4 Pro's triple‑camera gimbal, it replaces the need to carry and swap multiple fixed ND8/16/32/64 filters. The all‑in‑one dual‑window optic synchronously covers the 1″ Hasselblad wide‑angle main cam (upper window) and the 1/1.3″ mid‑tele + 1/1.5″ tele dual cams (lower composite window) — delivering perfectly matched exposure across all three lenses with zero brightness jumps when zooming.
Controlled electronically in flight via the DJI Fly app or remote, it offers continuous ND4–ND64 adjustment (2‑stop to 6‑stop) in both Auto and Manual modes. The filter draws power and data through 6 precision metal contacts at its base — no internal battery required. At only ≈5.3 g, it adds negligible gimbal load.
✨ Key Features
🎛️ World's First Electronic Variable ND — ND4 to ND64
- Continuously Adjustable: Smooth, stepless dimming from ND4 (25% light transmission / 2‑stop) to ND64 (1.56% transmission / 6‑stop).
- In‑Flight Adjustment: Change ND strength in mid‑air via touchscreen — no landing, no manual swapping.
- Auto Mode: System auto‑selects between ND4–ND16 to maintain the 180° shutter rule (24fps→1/48s, 30fps→1/60s, 60fps→1/120s).
- Manual Mode: Fine‑tune to any value within the ND4–ND64 range for precise creative control.
📸 Triple‑Cam Synchronous Dimming — Zero Exposure Jump
- Upper Lens Window: Covers the 1″ Hasselblad wide‑angle main camera.
- Lower Composite Window: Simultaneously covers the 1/1.3″ mid‑tele + 1/1.5″ tele dual cameras.
- Seamless Zoom: Wide → telephoto exposure stays consistent — no manual exposure compensation needed when switching lenses.
⚡ 6‑Point Contact — Powered by Gimbal, No Battery
- 6 Precision Metal Pins: Align with the gimbal's contact pads for instant data & power connection.
- Zero Onboard Battery: Filter is powered directly by the drone's gimbal — never needs charging.
- Secure Fit: Rotary latch mechanism — align, twist clockwise, lock in place of the original gimbal guard.
🔬 Premium Optical Quality
- Multi‑Layer Nano Coating: Suppresses glare, chromatic aberration, and color shift.
- High‑Strength Engineering Plastic Frame: Lightweight yet rigid — protects the optical glass.
- Hasselblad "H" Mark + eND 4‑64 Engraving: Authentic OEM quality and easy identification.
🪶 Ultralight 5.3 g — No Gimbal Impact
- At ≈5.3 g, the filter is barely noticeable by the gimbal motors — flight attitude, stabilization and battery life remain unchanged.
⚙️ Technical Specifications
💡 Usage Tips
- Auto Mode for Videography: Enable Auto eND in the DJI Fly app — the drone automatically maintains the 180° shutter rule across frame rates.
- Manual Mode for Long Exposure: Set to ND64 for motion‑blur waterfall, river, or light‑trail shots in bright conditions.
- Mid‑Flight Tweaks: If lighting changes (e.g. flying from shadow into sunlight), adjust eND in real time — no landing required.
- Pre‑Flight Check: Ensure the 6 metal contacts on the filter and gimbal are clean before mounting.
- Storage: Always return the filter to its hard case after use — the case also holds a microSD card for convenience.
⚠️ Important Notes
- Mavic 4 Pro EXCLUSIVE: ❌ Not compatible with Mavic 3 / Mavic 4 Pro (non‑Pro) / Air / Mini series — different gimbal geometry and contact layout.
- No Internal Battery: Filter is powered entirely by the drone's gimbal — no charging ever needed.
- Gimbal Guard Replacement: The eND filter replaces the stock gimbal protective cover — do NOT install both simultaneously.
- Glass Care: The optical surface is precision‑coated — clean only with the included microfiber cloth; avoid abrasive materials.