PIONEER T-N901 Cassette Deck Serviced, fully functional, and in good condition.
Description
Used ; Tested and confirmed to be in working order. While there are some minor scratches due to age, it is generally in good condition.
*Please check the images for details.
[Maintenance Performed]
① Replaced the tray belt and other belts with new V-belts due to looseness
② Replaced the capstan flat belt with a new one (changed from 3 mm width to 5 mm width to improve stability)
③ Reinforced the pinch roller section
*Due to aging and spring pressure, this model is highly prone to plastic cracking, which renders it unusable for recording; therefore, we have reinforced it in advance as a preventive measure (Photos 7 and 8).
④ Implemented measures to prevent control solenoids from falling off (occasional instances of detached components have been observed).
④ Demagnetized the head, adjusted the tape speed, cleaned the drive mechanism and head area with anhydrous ethanol, greased moving parts, and removed tarnish from the rear terminals using contact cleaner.
Key Features
Equipped with Pioneer’s proprietary 20-bit digital processing system
Effectively reduces tape hiss with Digital NR
Digital FLEX circuit that corrects high-frequency response in older cassette tapes
Natural sound reproduction via Legato Link Conversion
Compatible with Dolby B/C Noise Reduction
Equipped with A.S.E.S. function for automatic editing between CD, MD, and cassette
Equipped with a recording level adjustment knob
Main Specifications
Model: Stereo Cassette Deck
Head Configuration: 1 recording/playback head (hard permalloy), 1 erase head (ferrite)
Motor: 2 DC servo motors
Frequency Response
Type II (High Position): 20 Hz–18 kHz (±3 dB)
Type I (Normal): 20 Hz–17 kHz (±3 dB)
Wobble and Flutter: 0.08% WRMS
Signal-to-Noise Ratio
Dolby OFF: 57 dB or higher
Dolby B: 66 dB or higher
Dolby C: 73 dB or higher
Digital NR ON: Up to 85 dB
Power Consumption: 13 W
Dimensions: 212 mm (W) × 75 mm (H) × 282 mm (D)
Weight: Approx. 2.7 kg
(Caution) The voltage of this electrical appliance is 100V and is designed for Japan. If this product is to be used in countries outside Japan with voltages higher than 100V, such as 120V, 200V-240V, etc., a transformer must be used to adjust the voltage to the voltage of each country. Without a transformer, this product will surely break down and cause fire or accident.We are not responsible for any damage to this product caused by use without the correct transformer. Buyers are requested to provide their own transformer.