**WOBANK Rivet Nut Tool, 16" Heavy Duty Rivnut Tool Kit with 12PCS Metric/SAE Mandrels & 230PCS Rivet Nuts, Carrying Case, Auto-Release Nut Design for Automotive, Construction & DIY**

**Condition: Open box, like new.** This kit was purchased, used once, and returned quickly when the buyer realized it wasn't the tool they needed. The tool and contents are in like-new shape with no meaningful wear.

⚠️ **PLEASE READ: This kit is missing the gloves, the multi-functional wrench, and ONE (1) of the 5/16-18 rivet nuts. Everything else pictured is included. Priced accordingly. Please review all photos before purchasing.** ⚠️

You're looking at the WOBANK 16-inch semi-automatic rivet nut tool kit, a heavy-duty hand-lever rivnut setter built for installing threaded inserts into metal plate, tubing, and panels where you can't tap directly. The long 16-inch handles give you serious mechanical advantage, with a max leverage multiplier of 45, so you can set the big threads (all the way up to M12 and 1/2-13) without an air compressor or fighting the tool.

The auto-release design is the standout feature. After setting a nut, you just spread and squeeze the handles two to three times and the mandrel backs itself out of the installed insert. No hand-spinning the nut off the threads, which is the part that slows you down on cheaper setters. WOBANK advertises this as cutting installation time roughly in half.

**What's included:**

One 16-inch rivet nut tool with the M8 mandrel pre-installed. The handles are carbon steel, high-temperature heat-treated for corrosion resistance and to resist bending under load, finished with ergonomic non-slip curved rubber grips. The mandrel is chrome molybdenum alloy steel.

Twelve mandrels covering both metric and SAE: M3, M4, M5, M6, M8, M10, M12 plus 10-24, 1/4-20, 5/16-18, 3/8-16, and 1/2-13.

230 rivet nuts total (minus the one 5/16-18 noted above, so 229 in hand). The set runs 20 nuts per size across all sizes except 1/2-13, which comes with 10. Metric and SAE nuts are sorted into separate labeled PP organizer boxes.

The blow-molded carrying case, measuring roughly 16.93 x 13.39 x 4.65 inches (43 x 34 x 11.8 cm), with everything laid out in molded compartments and the color-coded thread gauges along the front.

**Tool specs:**

Length 390mm / 16 inches. Weight 1280g / 2.82 lbs. Stroke 7mm / 0.27 inches. Max leverage multiplier 45.

**Good for:**

Automotive modification and repair, equipment installation, mechanical maintenance, building and construction work, and general hardware assembly. Anywhere you need a strong, reusable threaded hole in thin material that's too thin to tap.

**Condition recap:** open box, used once, like new. Missing the gloves, missing the wrench, and short one 5/16-18 nut. The tool, all 12 mandrels, the remaining 229 nuts, the organizer boxes, and the case are all present as shown in the photos. Sold as-is. Message me with any questions before buying.