Graduated Pipettes, 6 Pack 5ml 10ml Glass Pipette with Bulb 2 Brushes and Rods
Graduated Dropper Pipettes include pipettes and the rubber squeeze bulb used together. Its main use is to transfer liquids, such as essential oils, acids, solvents, etc. It is widely used in labs, teaching experiments, microbiology, etc. Its material is borosilicate glass with clear scale lines, which is very practical.
Specification
Pipette Capacity: 5ml 10ml
Pipette Length: 200mm / 7.87 inch
Pipette Diameter: 10mm / 0.39 inch, 12mm / 0.47inch
Minimum Division Scale:0.1/0.2ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 6 x Graduated Dropper Pipettes, 6 x Rubber Bulbs, 2 x Brushes, 2 x Glass Rods
Advantage
It is made of borosilicate glass, which is thick and durable, so it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is made of rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction is completed, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Specification
Pipette Capacity: 5ml 10ml
Pipette Length: 200mm / 7.87 inch
Pipette Diameter: 10mm / 0.39 inch, 12mm / 0.47inch
Minimum Division Scale:0.1/0.2ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 6 x Graduated Dropper Pipettes, 6 x Rubber Bulbs, 2 x Brushes, 2 x Glass Rods
Advantage
It is made of borosilicate glass, which is thick and durable, so it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is made of rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction is completed, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
Graduated Pipettes, 6 Pack 5ml 10ml Glass Pipette with Bulb 2 Brushes and Rods
Graduated Dropper Pipettes include pipettes and the rubber squeeze bulb used together. Its main use is to transfer liquids, such as essential oils, acids, solvents, etc. It is widely used in labs, teaching experiments, microbiology, etc. Its material is borosilicate glass with clear scale lines, which is very practical.
Specification
Pipette Capacity: 5ml 10ml
Pipette Length: 200mm / 7.87 inch
Pipette Diameter: 10mm / 0.39 inch, 12mm / 0.47inch
Minimum Division Scale:0.1/0.2ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 6 x Graduated Dropper Pipettes, 6 x Rubber Bulbs, 2 x Brushes, 2 x Glass Rods
Advantage
It is made of borosilicate glass, which is thick and durable, so it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is made of rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction is completed, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Specification
Pipette Capacity: 5ml 10ml
Pipette Length: 200mm / 7.87 inch
Pipette Diameter: 10mm / 0.39 inch, 12mm / 0.47inch
Minimum Division Scale:0.1/0.2ml
Material: Borosilicate Glass, Rubber
Color: Clear
Package List: 6 x Graduated Dropper Pipettes, 6 x Rubber Bulbs, 2 x Brushes, 2 x Glass Rods
Advantage
It is made of borosilicate glass, which is thick and durable, so it can be used repeatedly. Moreover, the borosilicate glass material has high temperature and corrosion resistance.
There are clear and readable scale lines on the surface of the pipette, allowing you to measure the volume of the liquid precisely.
The bulb in the kit is made of rubber, so it is strong and resistant, has strong suction, and can absorb liquids well.
Instruction
1. Clean the pipette and blot up the tip inside and outside with filter paper before use
2. Put the bulb sleeve into the mouth of the pipette and fix it.
3. Put the pipette into the liquid container, and squeeze the rubber bulb to absorb the solution.
4. After the suction is completed, squeeze the rubber blub again to squeeze out the solution.
5. Remember to clean it at once after use.
NOTE
1. When using, the pipette should be vertically above. After absorbing the liquid, the pipette's mouth should not touch other objects.
2. After cleaning, place it in a ventilated place to dry.
3. When cleaning, handle with care to avoid collision and prevent breaking.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.