THINKCAR SR6 OBD2 SCANNER CAR DIAGNOSTIC TOOL
THINKSCAN SR6 :
- OBD2 scanner,
- 6 Systems Diagnostic Engine
- Transmission / ABS / SRS / TPMS / B-CM
- 5 Services Functions Oil / SAS / EPB / TPMS Reset
- Throttle Body Adjustment
- Battery Voltage Check
- Full OBD2 Modes Test
5 Lifetime Free Resets - Most Commonly Used Functions
- Oil Lamp Reset:Reset the Engine Oil Life system and turn off the oil change light after service for accurate maintenance tracking.
- Steering Angle Calibration:Clear fault codes, recalibrate the steering angle sensor, and turn off the steering wheel warning light to ensure proper alignment and safety system function.
- Electronic Parking Brake (EPB) Reset:Perform necessary resets after replacing brake pads or motors to maintain safety and efficiency of the electronic braking system.
- Throttle Position Reset:Relearn the throttle sensor's position after cleaning or repair to ensure correct air-fuel mixture and optimal engine performance.
- TPMS Reset:Relearn new tire sensor IDs directly from the vehicle's ECU after tire rotation or replacement, ensuring your TPMS functions accurately.
6 Systems Diagnostic :
This diagnostic tool provides comprehensive testing and analysis for six key vehicle systems: Engine, Transmission, ABS, SRS, TPMS, and Body Control Module (B-CM).
- Transmission system: Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.
- Anti-Lock Braking System (ABS system): Read and clear DTCs data flow in the ABS system. Performs various tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.
- Supplemental Restraint System (SRS System): Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.Read and clear fault code in SRS (Airbag) system and turn off warning light of airbag for making sure engine work properly and safely.
- Engine System: Thinkscan SR6 diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
- Body Control Module: The B-CM system collects the above information and outputs the corresponding control output (lights, windows, wipers and cleaning, etc.), load failure detection
- TPMS: TPMS diagnosis ensure the normal operation of real-time automatic monitoring of tire pressure. Healthy tires are a critical feature of a safe car. One of the easiest ways to prevent a vehicular accident is to maintain optimal pressure in your tires. Secure stability, braking, and cornering all depend on proper tire pressure. Tire failure, which is usually the result of under inflated tires, can result in serious accidents. Fuel efficiency and tire longevity also depend on tire pressure.
Free Full OBDII Functions:
- Read & Erase Codes --- Read extensive current, pending and permanent codes in OBD system quickly
- Turn Off MIL --- Clear detected fault codes and turn off the Check Engine Light efficiently, No more vague check engine lights.
- Auto VIN --- Retrieve the vehicle information of VIN, CINs, and CVNs completely
- Live Data --- View graphical live data of vehicle's computer module(s) for easy analyses
- DTC Look-up --- View the vehicle's operating parameters at the moment a DTC is detected
- Freeze Frame --- allows vehicle to snapshot data once a code is stored.
- I/M Readiness --- Read I/M readiness status to have a vehicle inspected for state emissions compliance
- Smog Test --- Check I/M Readiness status before the emission inspection to pass the emission inspection successfully to avoid being fined.
- O2 Sensor Test --- Perform O2 sensor test to check fuel efficiency and vehicle emissions
- On-Board Monitor Test --- Read the results of on-board diagnostic monitoring tests for specific components/systems
- EVAP System Test --- Command the vehicle’s on-board computer to start the leak test, Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system
Extra diagnosis features
Except the full OBDII modes and 6 system diagnosis, SR6 code reader is equipped with the battery voltage test, auto VIN, data stream, version info check, oil reset, EPB reset, SAS reset, TPMS reset, throttle body adjustment, DTC look up, data graphical display, pint data, data playback, online feedback, thus you are able to monitor the battery voltage timely, AutoVIN retrieval allows you quickly match the right software updated.
Live Data Stream + 2-in-1 Data in Graph
Thinkscan SR6 car diagnostic scanner shows you the vehicle's essential information like RPM, Load value, speed, O2 Sensors' location and oil air temperature in real-time, choose the data you need to know and present it simultaneously on the same chart, helps you to identify and correct problems more easily and quickly.
Auto-VIN + Export Report by E-mail or QR code + Screenshot + Screen recorder
- Auto-VIN helps to identify your vehicles at any time.
- The vehicle health report can be generated by scanning the QR code, convenient share or print the diagnostic reports.
- Supports screenshot and screen recorder, helping you save the important information at any time.
- 8G Storage Capacity and 1G Memory, no need to worry about too many files.
Easy to Use
SR6 OBDII scanner is an easy to use and plug-n-play check engine, ABS,SRS, transmission B-CM TPMS code reader that read and clear codes. And this error code reader comes with an convenient interface, even if you are not familiar with vehicle repair, you can quick take control of this code reader, and get the information you want
Built-In DTC LookUp Library
It also gets the Built-in Diagnostic Trouble Code (DTC) lookup library - Defines the error code on the screen. This will save you the trouble of having to go online to look for the meaning of a diagnostic trouble code.
Retrieve Vehicle Information
SR6 OBD2 code reader can easily get access to the car’s ECU and retrieve its information, including VIN (Vehicle Identification Number) for accurate diagnoses. No need to look around for the VIN.
Packing List:
1*THINKCAR SR6 Host
1*Manual
1*Charging cable
