Upgraded Tank Light & Timer Function : The newly upgraded fish tank light combines a programmable timer with a blue backlit LCD screen. The blue backlit LCD screen is light-friendly and gentle on the eyes. The lamp can simulate a 24-hour light cycle and is equipped with a timer function that automatically lights up and turns off at the set time.
Three modes (day, night and DIY mode) : In day mode, the light simulates the changes in light throughout the day. The light slowly becomes brighter, then gradually dims and disappears. In night mode, you can choose the color of the light. DIY mode has 8 time periods from L1 to L8, and you can set the time, brightness, color and color temperature. All modes have a 3-minute gradual rise or fall process when the light changes, which does not alarm fish creatures.
10 Levels Brightness Adjustment & 7 Colors Lighting : The brightness of the sink light can be adjusted in 10 stages from 10% to 100%. The lamp can be selected from 7 colors, R25% red, RG30% orange, RG50% yellow, G25% green, BG50% blue, B25% blue, RB50% purple. You can choose the appropriate color according to your feeding needs. Full spectrum illumination is beneficial for the growth of tropical fish, ornamental fish, reptiles, and aquatic plants.
IP68 Waterproof & Heat Dissipation : The LED aquarium light is coated with a 0.5mm waterproof silicone layer and has an IP68 waterproof rating. so there is no need to worry about droplets. 11cm wide panel, 1.2mm upgraded high-quality aluminum shell, can more effectively protect against moisture and water intrusion. After special oxidation treatment, the heat dissipation performance of the product is very excellent.
Suitable for 45-60cm Aquarium & High Quality LED Light : The aquarium light has an adjustable stand and is compatible with 45-60cm aquariums. Equipped with 98 high-brightness LED lights, it can not only illuminate the depth of the entire tank, but also stimulate the photosynthesis of aquatic plants. The 18W aquarium lamp has 48 white lamp beads, 7 red lamp beads, 5 green lamp beads, 18 blue lamp beads, and 20 RGB lamp beads.
Product Description
driamor Advanced Aquarium Light
Full spectrum LED aquarium light, WRGB three primary colors, simulated nature light, promote the growth and development of the aquarium plants.
Ultra bright LED Light makes good effect on green aquarium plants, ideal for freshwater fish and low-high light level aquarium plants, not for saltwater use.
Power off memory function. This WRGB slim LED aquarium lighting use IC memorizer, after the light resumes work, the setting of fish tank light will not lost. Just need to set the local time.
Lamp bead lifespan: 50,000 hours.
NOTE: If you have any questions about use, please let us know and we will send you a pdf manual.
Due to factory production errors, some aquarium light controllers may not have stickers. If you receive such a product, please let us know in time and we will provide you with a service.
Due to factory production errors, some aquarium light controllers may not have stickers. If you receive such a product, please let us know in time and we will provide you with a service.
Day Mode
You can set the daylight mode time yourself. (Default time: 6:30-20:30.)
The light displayed in day mode is white light (W+R+G+B). In daylight mode, you can choose the brightness you want.
The aquarium light will automatically change according to the brightness you set. As shown in the picture, it will slowly reach the brightness you set, and then slowly decrease.
Sudden changes in lighting can frighten fish, and we have fully taken this into consideration. In order not to disturb your aquatic creatures, there will be 15 minutes to slowly adjust the brightness during the light change process.
Moon Light Mode
You can set the time of night light mode by yourself. (Default time: 20:40-23:30.)
Please note: The brightness of the lights in night light mode is not adjustable, but you can choose different colors.
In order not to disturb your aquatic creatures, there will be 15 minutes to slowly adjust the brightness during the light change process.
DIY Mode
The DIY mode is divided into 8 time periods. You can customize the start and end time, color, and brightness of each time period according to your own preferences.
In DIY mode, you can set the brightness of the four WRGB colors in each time period. For example, in the L1 stage, you can set the light brightness to: W10%, R0%, G20%, B0%.
In order not to disturb your fish, we will have a slow gradient process of 15 minutes at the beginning and end of the mode. When each stage alternates, there is a 3-minute gradient time, please rest assured.
NOTE: If you have any questions about use, please let us know and we will send you a pdf manual.