• Vehicle Information Fitment:
  •  
  • 2005-2009 Hyundai Tucson
    2005-2010 Kia Sportage 
  • Package Include:
  •  
  • 1Pcs Brake Calipers 
  •  
  • Steps to replace a brake Caliper:
  •  

    • 1Pcs Disc Brake Caliper Front Left w/ Bracket For 2005-2009 Hyundai Tucson

    Vehicle Information Fitment:

     

    2005-2009 Hyundai Tucson
    2005-2010 Kia Sportage

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     


    Item Specifics
    Brand top-modifiedstore
    Manufacturer Part Number TM1761362801S
    Interchange Part Number 19B2996w/ bracket
    Product Type Direct Replacement
    Manufacturer Warranty 1 Year
    Bundle Description 1x Brake Caliper
    OE 19B2996
    Surface Finish Zinc Plated
    Color silver
    Position on the vehicle Front Driver
    Casting Material High Quality Cast Metal
    Brake Calipers Type Floating
    Brake Caliper Piston 1 Metal Piston
    Grade Description Premium
    Copper Washers Included Yes
    Brake Bracket Included Yes
    Mounting Hardware Yes
    Pads Clips Included Yes
    Inlet Port Thread Size M10*1.0
    Bleeder Port Thread Size M10*1.0
    Piston Outside Diameter 60 mm/2.36In.
    Other Part Number Front Left brake Caliper replacement

    Payment

    1.The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.

    Shipping

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    3.Local pick up is not available.

    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.

    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Contact Us
    1.We will leave a feedback once we get your payment.
     
    2.If you are satisfied with the product you received, wish you can leave us a feedback.
     
    3.If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem.

    Shop Category
     Store Home
     50% coupon
     Air Shocks & Components
     Bumpers
     Lift Support
     Rear Control Arm Camber Arm
     Coilovers Kits
     Shocks, Struts & Assemblies
     Struts & Suspension kit
     Brake Calipers
     Coil Springs
     Other
    Hot Item
    Excellent Delivery

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    1Pcs Disc Brake Caliper Front Left w/ Bracket For 2005-2009 Hyundai Tucson

    Vehicle Information Fitment:

     

    2005-2009 Hyundai Tucson
    2005-2010 Kia Sportage

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     



    1.The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    3.Local pick up is not available.

    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    1.We will leave a feedback once we get your payment.
     
    2.If you are satisfied with the product you received, wish you can leave us a feedback.
     
    3.If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem.

    All rights reserved.