Easy installation

No drilling hole, fast installation, just plug and play.

1. Take out the pickup and toward the 3.5mm jack side to the guitar bridge.

2. Slip the pickup into the soundhole from the high E string side. (Lose the string if it's too tight)

3. Clip both sides of the pickup to the edge of the pan

4. Push the pickup to the end of the fingerboard as closely as possible.

• The Donner guitar pickups FITS in soundholes from 3.8” (96.6mm) to 3.94” (100mm) diameter.

• Reducing Noise - DSS-6 is a passive guitar pickup with the humbucking model (no battery is needed). It uses the magnetic field to collect the string vibration and pass it to the speaker, which is not affected by the external environment so that effectively reduces noise.

• Original and Clear Sound - DSS-6 uses a customized rare earth neodymium magnet, ensuring the sound is sweet and clear.

• Volume & Tone Control - Provide volume control and tone control. It's easy to adjust the sound to get the best string balance.

• Solid Mahogany Housing - Solid Mahogany Housing can transmit acoustic vibrations stably, providing a balanced and clear tone. Also, the vintage Mahogany appearance with natural pattern matches every acoustic guitar.

• Easy Installation – don’t need to drill, Install in the soundhole and adjust screw to firm installation.