Black Heavy Duty Camping Tent Pegs can be hammered into rocky ground

without much effort. They're really that tough! A big flat head minimizes slipping

possibility and the hole on the hook makes it easy to be pulled out!

Instruction:

1. Put the stake at 60 degree angle on the ground, and keep the hook under the head of the stake facing the ground.

2. Push the stake with a tent hammer into the ground and leave about 1.5 inches out.

3. Fasten the tent rope between the hook and nail.

4. Remove the rope and untie it.

5. Use the hole on the hook to pull the camping stake out with a tent hammer.

Warm Tips:

Please be careful of the storage bag inside when you cut the wrap open

1. Please remove the soil and dust with a dry rag first

2. Clean it with a little wet rag and dry it outside

3. Apply some lubricate on it and keep it in a dry and ventilated place

Specifications:

Diameter: 0.40 inches

Color: Black

Material: Forged S45C Steel

Includes:

12 X Tent Stakes

1 X Storage Bags

MULTI-USE: Tent stakes are suitable for nailing tents, canopies, tarps, and etc. to the ground. Perfect for outdoors camping and backpacking. Long and large tent stakes make sure your camping trip safe in the tents.
Stakes Size: The tent stake is 12 inches long and 2/5 inches in diameter which is much bigger and stronger than most stakes on the market.
EASY TO USE: Metal stopper and sharp tip make it easy to drive the stake into the ground and it is easy to pull out the stake the hole and the hook on the top.
STURDY MATERIAL: Made of forged steel. Long and heavy enough to stand against the wind.
Tips for better use: - Please do not nail the tent stake vertically to the ground. - Make the tent stake and the ground into a 60-degree angle. - Please leave about 1.6 inches (4cm) of the tent stake on the ground to have enough room to tight the rope. - Use the hook to tight the rope. - Use the hole to pull out the tent stake.