Enbrighten Add-On Toggle Switch With QuickFit And SimpleWire Light Almond
New in box.
Install an additional switch to control a single lighting fixture or other electrical device from an additional location with the Enbrighten In-Wall Add-On Toggle Switch. This add-on toggle switch shares control of the same wired load as a connected primary Enbrighten in-wall switch or dimmer to create a multi-way lighting control configuration. If the connected Enbrighten primary switch is a part of a smart home automation network, the Add-On Toggle Switch remains capable of controlling the wired load but does not act as a signal repeater. The Add-On Toggle Switch cannot function as a standalone switch and must be included into or create a multi-way wiring configuration. The Switch can be included into multi-way wiring configurations up to 6-way control, with up to 4 Add-On Switches being paired with a single Enbrighten switch. If multiple Add-On Switches are a part of a single multi-way configuration, the Add-On Switches must be installed no more than 75ft away from each other, no more than 200ft away from the primary switch, and the entire configuration must not exceed 300ft from one end to the other.