• Vehicle Information Fitment:
  •  
  • 2007-2011 Dodge Nitro
    2008-2012 Jeep Liberty
    2007-2017 Jeep Wrangler
    2018-2018 Jeep Wrangler JK 
  • Package Include:
  •  
  • 1Pcs Brake Calipers 
  •  
  • Steps to replace a brake Caliper:
  •  
  • 1x Rear Left Brake Caliper w/ Bracket For 08-12 Jeep Liberty 2007-2017 Wrangler

    Vehicle Information Fitment:

     

    2007-2011 Dodge Nitro
    2008-2012 Jeep Liberty
    2007-2017 Jeep Wrangler
    2018-2018 Jeep Wrangler JK

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     



    content_src_url


    Item Specifics
    Brand :Topcn-AutoParts
    Manufacturer Part Number :TOP17611001S
    Interchange Part Number :18B5046
    Product Type : Direct Replacement
    Warranty :1 Year
    Bundle Description :1x Brake Caliper
    Surface Finish :Powder Coated
    Surface Finish :Powder Coated
    Position on the vehicle :Rear & left
    Casting Material :High Quality Cast Metal
    Brake Caliper Piston :1 Phenolic Piston
    Grade Description :Premium
    With Bracket :YES
    Mounting Hardware :NO
    Pads Clips Included :NO
    Inlet Port Thread Size :M10 x 1.0
    Bleeder Port Thread Size :M10*1.0
    Piston Outside Diameter (in) :1.89
    Other Part Number ::disc Rear Left brake Caliper replacement
    Color :Red

    Shipping

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    Payment

    We accept multiple payment methods

    Returns

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

    Customer Services

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Shop Category
    1x Rear Left Brake Caliper w/ Bracket For 08-12 Jeep Liberty 2007-2017 Wrangler

    Vehicle Information Fitment:

     

    2007-2011 Dodge Nitro
    2008-2012 Jeep Liberty
    2007-2017 Jeep Wrangler
    2018-2018 Jeep Wrangler JK

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     



    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    We accept multiple payment methods

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.


    Copyright of Topcn-autoparts. All rights reserved.