Technical Specification: Operating Voltage: DC 12V(fit 12V vehicles) Color Temperature: 6000K White IP68 rated water and dust seal, over 50000hrs lifetime Beam Angle: 360 degree Material: Aviation 6063 aluminum profile Operating Temperature: -40-80 degree Celsius
Advantage: *Latest X3 CSP chip light source, 2 luminous faces no blind zone *Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light *White light reflect road paint/signs better to show clearer road situation during night driving *270 degree low beam angle with cut-off line, will not dazzle oncoming traffic *Built-in constant current CPU, instant full brightness without start-up relay Install Caution *As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. *Put the vehicle into park or make sure it is securely in gear. *Be sure to turn off the ignition and remove the key. *Be careful to avoid burns, especially when turning on or off the vehicles lighting. *Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. *Fully examine the connection of the contact points, ports and the wires as faulty connections cancause lighting problems. *Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. Notice: 1.The product must be installed by professionals. Please disconnect the car battery before installation. Please check the wiring after installation. |