Key Features1.Single AMD EPYC™ 7003/7002 Series Processor
(7003 Series Processor drop-in support requires BIOS version 2.0 or newer)2.2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs3.Expansion slots:
 5 PCI-E 4.0 x16
 2 PCI-E 4.0 x8
 M.2 Interface: 2 PCI-E 4.0 x4
 M.2 Form Factor: 2280, 22110
 M.2 Key: M-key
4.8 SATA3, 2 M.2,
8 SATA3 or 2 NVMe via single SlimSAS x85.2 Gigabit Ethernet LAN Ports6.ASPEED AST2500 BMC graphics7.Up to 6 USB 3.0 ports
 (4 rear + 2 via header)8.7 PWM 4-pin Fans with tachometer status monitoring
Specifications 
 
Product SKUs
 
MBD-H12SSL-i
  • H12SSL-i
MBD-H12SSL-i-O
  • H12SSL-i (Retail Pack)
 
Physical Stats
 
Form Factor
  • ATX
Dimensions
  • 12" x 9.6" (30.5cm x 24.4cm)
 
Processor/Chipset
 
CPU
  • Single AMD EPYC™ 7003/7002 Series Processor
    (7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
  • Socket SP3
Cores
  • Up to 64 Cores
Chipset
  • System on Chip
 
System Memory
 
Memory Capacity
  • 8 DIMM slots
  • Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM
  • 8-channel memory bus
Memory Type
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
SATA
  • SATA3 (6 Gbps)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • Dual gigabit LAN via Broadcom BCM5720
  • 1 Realtek RTL8211F PHY (dedicated IPMI)
VGA
  • ASPEED AST2500 BMC
 
Input / Output
 
SATA
  • 8 SATA3 (6 Gbps) ports
SATA/NVMe Hybrid
  • 8 SATA3 or 2 NVMe via single SlimSAS x8
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 6 USB 3.0 ports
    (4 rear + 2 via header)
VGA
  • 1 VGA port
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connectors
  • 1 TPM 2.0 header
 
Expansion Slots
 
PCI-Express
  • 5 PCI-E 4.0 x16
  • 2 PCI-E 4.0 x8
 
M.2
  • Interface: 2 PCI-E 4.0 x4
  • Form factor: 2280, 22110
  • Key: M-key
 
Chassis ( Optimized for H12SSL-i )
 
1U
  • SC813MFTQC-350CB2
  • SC813MFTQC-R407CB
2U
  • SC213BAC8-R1K23LPB
  • SC216BE1C4-R1K23LPB
  • SC825MBTQC-R802LPB
  • SC825TQC-R802LPB
  • SC826BE1C4-R1K23LPB
  • SCLA26AC12-R920LP1
3U
  • SC835TQC-R802B
  • SC836BE1C-R1K23B
Mid-Tower
  • SC732i-903B
Tower/4U
  • SC745BAC-R1K23B
  • SC846BE1C-R1K23B
 
 
Server(s) ( with H12SSL-i )
 
Model(s)
  • AS -2014S-TR
  • AS -3014TS-i
 
System BIOS
 
BIOS Type
  • AMI 256Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
 
Management
 
Software
  • Super Doctor 5
  • Watch Dog
  • NMI
  • SUM
  • IPMI 2.0, KVM with dedicated LAN
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
 
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +5V standby, +3.3V standby
  • CPU switching voltage regulator
  • Supports system management utility
  • VBAT
FAN
  • Up to 7-fan status tachometer monitoring
  • Up to 7 4-pin fan headers
  • Dual Cooling Zone
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 7x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
  • UID
   
Operating Environment / Compliance
 
Environmental Specifications
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
  
Parts List 
 
Bulk Pack List
 
  Part Number Qty Description
H12SSL-i MBD-H12SSL-i-B 1 H12SSL-i Motherboard
       
I/O Shield MCP-260-00042-0N 1 STD I/O SHIELD FOR X9 SOCKET R SERVER MB

Payment

1. We accept all kinds payment.

2. When using Paypal,your money is deposited securely in your account.

3. The buyer is responsible for customs duties

 

 

Shipping

1. We guarantee to ship out within 24 hours after payment confirmation(except Holiday).

2. If there is any unexpected situation（for example,if the order can not ship out within 24 hours),we will contact you as soon as possible,and follow up closely to ship your order soon.

 

3. All products will be tested strictly before shipping.

 

4. We ship to Paypal address ONLY.Please make sure your address in Paypal is matched with your shipping address before you pay.

 

 

 

Contact US

We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.

 

PushAuction