4Pcs Smoked/Tinted Tape-on Mugen-Style Wind Deflector, Rain Guard, Window Visor, Vent Deflector For Toyota Yaris XP90 2005-2011 Hatchback 5-Door

Package Included:

4Pcs / Set Door Window Weather Shield Visors 

Fitment:

For Toyota Yaris XP90 2005-2011 Hatchback 5-Door

Specification:

Attachment Method: Adhesive, Tape-On

Features: Durable, UV-Proof, Tinted, See Through, Transparent, Custom-Fit

Material: Acrylic

Color: Smoked/Tinted, See Through Transparent

Type: Window Visor Shield Deflector Guard

Features:

Rain Deflection: Keep your windows partially open during rain without getting soaked.

Wind Blockage: Reduce wind noise and turbulence inside the vehicle.

Sun Protection: Shield your eyes from the sun's glare, especially when driving low-angled sunlight.

Dust and Debris Prevention: Keep dust, dirt, and other debris from entering the vehicle.

Fresh Air Flow: Allow fresh air to circulate inside the vehicle without fully opening the windows.   

Reduced Heat: Help to cool down the interior of your car by allowing fresh air to enter.   

Fog Reduction: Prevent fogging on the windows by allowing air to circulate.

Installation Instruction:

Materials Needed:

Window deflector set

Cleaning cloth

Isopropyl alcohol (we don’t provide)

Adhesive tape (provided with the window deflectors)

Installation Steps:

Clean the Window Surface:

Using a cleaning cloth, thoroughly clean the surface of the window where the deflector will be applied.

Ensure the window is free of dirt, dust, and any residues.

Prepare the Surface with Isopropyl Alcohol:

Dampen a clean cloth with isopropyl alcohol.

Wipe the window surface with the alcohol-soaked cloth to remove any remaining contaminants and ensure proper adhesion.

Position the Window Deflector:

Identify the correct deflector for the specific window.

Position the deflector on the exterior of the window to ensure proper alignment.

Attach the Adhesive Tape:

Peel off the protective backing from the adhesive tape on the deflector.

Carefully align the deflector with the window frame, ensuring it fits securely.

Press Firmly for Adhesion:

Once the deflector is properly positioned, press firmly along the entire length to secure the adhesive tape to the window frame.

Repeat for Other Windows:

Repeat the process for each window where deflectors are to be installed.

Allow for Adhesive Cure Time:

It is recommended to allow the adhesive to cure for at least 24 hours before driving or rolling down windows.

Note:

Ensure ambient temperature is above 50°F (10°C) for optimal adhesion.

Do not wash the vehicle or roll down windows during the curing period.

Maintenance:

Clean the deflectors with mild soapy water and a soft cloth.