Features:

* Ultra-wide frequency band coverage, supporting 1Hz-15GHz full-band signal output, covering low-frequency audio to microwave frequency bands, meeting the needs of communications, and scientific research and testing.

* High-precision signal output, using DDS digital synthesis technology, frequency resolution up to 0.1Hz, phase noise less than -110dBc/Hz@1GHz, to signal purity

* Intuitive operation interface, equipped with 3.5-inch color LCD screen, supports dual operation of touch and knob, can display waveform parameters in real time and store 10 sets of preset for CONFIGURATIONS.

* Multi-scenario compatibility, supports AM/FM/PM modulation and pulse signal generation, compatible with 50Ω/75Ω impedance, suitable for laboratories, production lines, and field work environments.

* reliability, all-metal shielded housing, passed MIL-STD-810G vibration test, operating temperature range -20°C~60°C, stable operation under extreme conditions.

* Signal generator has 1Hz-8G/1Hz-9.5G/1Hz-15GHz wideband output, CH2 with amp regulation, internal OCXO, support external connection frequency standard.

Specification:

Part Name: Signal Generator

Model: 1Hz-8G, 1Hz-9.5G, 1HZ-15G (Optional)

Material: Metal

Color: As shown in the picture

CH1 frequency range: 1Hz-250MHz

CH1 step: 1Hz-19.999999MHz/1Hz, 20MHz-200MHz/10Hz

CH1 Output Amplitude: 3.3Vpp

CH1 port type: BNC

CH2 frequency range;

WB-SG1-8G：35MHz-8GHz

WB-SG1-9.5G：20M-9.5G

WB-SG1-15G：10MHz-15GHz

CH2 step: 1Hz

CH2 Reference Output Power: 5dBm to -7dBm @ 1G

CH2 output impedance: 50 ohms

CH2 port type: for SMA

Internal reference frequency: 10MHz

Internal reference type: OCXO

Internal reference burn-in: 0.5Hz/year

10M reference output port power: 5dBm

External reference input power range: 0dBm to 20dBm

Mode: CH1 point frequency mode, CH2 point frequency mode, CH1 frequency sweep mode, CH2 frequency sweep mode

Front Panel Functions: (as follows)

Mode: Switch to work mode

ENT: Enter data

4 buttons: left/right/up/down

CH1: Production of Chanel1

CH2: Output of channel2

Rear Panel Functions: (as follows)

10MHz Reference Input: External 10M reference input

10MHz Reference Output: 10M reference output

USB: USB port

STD ADJ: Internal OCXO frequency tuning

On/Off: Power switch

With DC socket

Power supply: DC11.7-12.5V, star: less than 0.5A, stable: less than 0.25A

Size: 106*55*105mm

Weight: 350g

Accessories: DC12V adapter

Package Contents:

1 x Signal Generator

1 x DC 12V power adapter

Note：

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2.Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.

We only ship to confirmed Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries.  for TRANSIT time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive is very important to us. If you have any questions, please feel to contact us via "Ask seller a question" . We will reply your email within 24 working hours.