Dental double pen sand blasting box porcelain inner crown orthodontic bracket sand blasting machine
This machine is an indispensable equipment for dental restorations and is mainly used to remove all kinds of tiny surface oxides. At the same time, it can also cast glass beads on the surface of plastic base.
2. Technical parameters:
Voltage: 110V/220V
Power: 15W (LED lamp)
Pressure: ≥4kg
Grit size: 100#~18O#
Weight: 20kg
Third, the use of methods
1. First, plug each tube connector tightly.
2. Insert the power cord and foot switch tube into the corresponding jacks.
Enter the store to store around
3. Unscrew the lids of the two sand cups and pour sand into them. The recommended height is half of the jar. Do not bury the sand outlet tube as this will affect the sandblasting results and clog the air line.
4. Adjust the pressure regulating valve so that the machine can work only when the pressure is more than 0.4MPa. Adjust the reversing direction to control the sand coming out of the left and right nozzles.
5. To clean the sand inside the machine, unscrew the screw directly underneath and lift the machine up, the sand will flow out naturally from the screw hole.
This machine is an indispensable equipment for dental restorations and is mainly used to remove all kinds of tiny surface oxides. At the same time, it can also cast glass beads on the surface of plastic base.
2. Technical parameters:
Voltage: 110V/220V
Power: 15W (LED lamp)
Pressure: ≥4kg
Grit size: 100#~18O#
Weight: 20kg
Third, the use of methods
1. First, plug each tube connector tightly.
2. Insert the power cord and foot switch tube into the corresponding jacks.
Enter the store to store around
3. Unscrew the lids of the two sand cups and pour sand into them. The recommended height is half of the jar. Do not bury the sand outlet tube as this will affect the sandblasting results and clog the air line.
4. Adjust the pressure regulating valve so that the machine can work only when the pressure is more than 0.4MPa. Adjust the reversing direction to control the sand coming out of the left and right nozzles.
5. To clean the sand inside the machine, unscrew the screw directly underneath and lift the machine up, the sand will flow out naturally from the screw hole.
