Fitment:
Fits for 1-5/8" Outer Diameter (OD) Tie Rod Clamp. Compatible with Jeep Wrangler JL JLU JT 2018-2022. Some late model JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility
Features:
1) This steering stabilizer clamp is designed to mount factory and aftermarket steering stabilizers utilizing a 1/2" mounting bolt to a 1-5/8" diameter tie rod or drag link. This is for steering stabilizers only and is not intended for use with hydro assist
1) This steering stabilizer clamp is designed to mount factory and aftermarket steering stabilizers utilizing a 1/2" mounting bolt to a 1-5/8" diameter tie rod or drag link. This is for steering stabilizers only and is not intended for use with hydro assist
2) The Steering Stabilizer Tie Rod Clamp is designed to mount any steering stabilizer utilizing a 1/2" mounting bolt to a 1-3/8", 1-1/2", or 1-5/8" diameter tie rod or drag link. Replace your embarrassingly weak and vulnerable factory steering stabilizer/tie rod clamp with our heavy duty CNC machined clamp
3) Made of high quality heavy duty steel, stURdy and durable. Zinc plated for maximum corrosion resistance. A 1/2" mounting bolt 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools. Once secured to your tie rod our clamp will give you a lifetime of use
nstallation Notes
- 1.Verify the correct location for the clamp on the tie rod by cycling the steering full lock both
- directions and extending and collapsing the steering stabilizer.
- 2. Install tie rod clamp on the tie rod with the ½” mounting hole towards the steering stabilizer.
- 3. Attach the end of the steering stabilizer to the tie rod clamp using the provided ½” bolt with a washer
- on top (and bottom if necessary).
- 4. Install all 6 socket head bolts into bottom half of clamp.
- 5. Verify clamp and stabilizer are rotated into the correct position.
- 6. Torque the socket head bolts to 15 lb-ft.
- 7. Torque ½ inch mounting bolt to 50 lb-ft.
- 8. Cycle steering lock to lock to make sure there is no interference.
- 9. Check bolt torques after approximately 100 mile
Package included:
Include 1x 1.5" bolt, 2x washers, 6 x socket head cap screws 
