• Product Specifications:
  • (Please make sure you take the proper measurements before purchasing)
  •  
  • Quantity: 4pcs  Thickness: 1.5 inch (38mm) per spacer
  • Hub Bore Size: 110mm  Vehicle Bolt Pattern: 4x137mm  Wheel Bolt Pattern: 4x156mm  Thread Pitch: M12x1.5
  •  
  • How to choose the correct wheel spacers:
  • STEP. Check 3 specifications  The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
  • 4Pcs 1.5" Wheel Adapters 4x137 to 4x156 Fits Kawasaki ATV 4/137 to 4/156 12x1.5

    Product Specifications:

    (Please make sure you take the proper measurements before purchasing)

     

    Quantity: 4pcs
    Thickness: 1.5 inch (38mm) per spacer

    Hub Bore Size: 110mm
    Vehicle Bolt Pattern: 4x137mm
    Wheel Bolt Pattern: 4x156mm
    Thread Pitch: M12x1.5

     

    How to choose the correct wheel spacers:

    STEP. Check 3 specifications
    The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.


    1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)


    2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.


    3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    How to install the wheel spacers:

    1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.


    2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.


    3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.


    4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.


    5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.


    Item Specifics
    Brand sinwonparts
    Manufacturer Part Number SI844275N01
    Type Wheel Adapters
    Quantity 4pcs
    Thickness 1.5" / 38mm
    Vehicle Bolt Pattern 4x137mm
    Wheel Bolt Pattern 4x156mm
    Hub Bore Size 110mm
    Hub Centric No
    Thread Pitch M12x1.5 / 12mmX1.5 / 12x1.5
    Stud Grade 10.9
    Color Black
    Lug Patterns 4 Lugs
    Material High Quality 6061-T6 Billet Aluminum
    Surface Finish CNC Machined Polished Aluminum Finish
    Placement on Vehicle Left Right Front Rear
    Interchange Part Number fits 2005-2013 Kawasaki Brute Force 650
    Other Part Number for atv wheel spacers
    Superseded Part Number 4x137 to 4x156 Wheel Spacers Adapters
    Manufacturer Warranty 1 Year
    Return Free 30 day returns
    Delivery Area the USA
    Place of Delivery Ontario,California

    Payment
    We will only ship to the confirmed shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    Shipping
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    Returns
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    Contact Us
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    4Pcs 1.5" Wheel Adapters 4x137 to 4x156 Fits Kawasaki ATV 4/137 to 4/156 12x1.5

    Product Specifications:

    (Please make sure you take the proper measurements before purchasing)

     

    Quantity: 4pcs
    Thickness: 1.5 inch (38mm) per spacer

    Hub Bore Size: 110mm
    Vehicle Bolt Pattern: 4x137mm
    Wheel Bolt Pattern: 4x156mm
    Thread Pitch: M12x1.5

     

    How to choose the correct wheel spacers:

    STEP. Check 3 specifications
    The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.


    1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)


    2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.


    3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    How to install the wheel spacers:

    1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.


    2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.


    3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.


    4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.


    5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.

    Item Specifics
    Brand :sinwonparts
    Manufacturer Part Number :SI844275N01
    Type :Wheel Adapters
    Quantity :4pcs
    Thickness :1.5" / 38mm
    Vehicle Bolt Pattern :4x137mm
    Wheel Bolt Pattern :4x156mm
    Hub Bore Size :110mm
    Hub Centric :No
    Thread Pitch :M12x1.5 / 12mmX1.5 / 12x1.5
    Stud Grade :10.9
    Color :Black
    Lug Patterns :4 Lugs
    Material :High Quality 6061-T6 Billet Aluminum
    Surface Finish :CNC Machined Polished Aluminum Finish
    Placement on Vehicle :Left Right Front Rear
    Interchange Part Number :fits 2005-2013 Kawasaki Brute Force 650
    Other Part Number :for atv wheel spacers
    Superseded Part Number :4x137 to 4x156 Wheel Spacers Adapters
    Manufacturer Warranty :1 Year
    Return :Free 30 day returns
    Delivery Area :the USA
    Place of Delivery :Ontario,California


    We will only ship to the confirmed shipping address given with the payment.
    ☆ Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
    ☆ All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    ☆ We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
    ☆ The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    ☆ We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    ☆ We stand behind every product we sell.
    ☆ All of our brand new items come with a 30-Days money-back guarantee.
    ☆ We define the item as defective only if it doesn't function as described.
    ☆ It is the buyer's responsibility to understand the item description before bidding.
    ☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
    ☆ Man-made damage by  abuse or wrong operation is not covered by this warranty.
    ☆ No  product liability insurance is assumed.
    ☆ We are always been trying to provide best service and reliable products for every customer.
    ☆ If you are satisfed with the product you recieved, please have a good share.
    ☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to  reslove any problem for you.

    SINWONPARTS All rights reserved.