Features:

【500% Brighter】AUXITO  LED headlight bulbs are designed with double-sided CSP-LED chips, 6500K cool white, 40000Lumen per set, 500% brighter than stock halogen bulbs, a perfect upgrade for halogen headlights. Allows driver get a farther, brighter, and clearer vision when driving at night.

【50,000+hrs Lifespan】The advanced LED technology effectively reduces the energy consumption of Led headlight during operation. Premium aviation aluminum and 12,000RPM high-speed silent cooling fan effectively pull the heat away from the LED chips, which ensures long service life of up to 50,000 hours.

【1:1 Beam Pattern】AUXITO  LED headlights 1:1 simulate the beam pattern of halogen bulbs, use ultra-thin 0.03in baseboard to ensure 360° lighting without black spots. And the emitted light beam is focused on the ground, will not cause glare to oncoming drivers.

【10min Installation】Unlike other LED lights, AUXITO headlight bulbs have no external driver and connector, fully all in one. That makes the bulbs almost the same size as the halogen bulb. Due to the wireless design, installation is a breeze, just plug and play.

【99% CANbus Ready】Built-in anti-flicker CANbus unit, LED headlights are compatible with 99% of vehicles’ systems, no polarity, no radio interference, and error-free. Some sensitive models may require resistor.

Specification：

AUXITO E2 Series Bright White LED Headlight Bulb Conversion Kit

Upgrade Version 9005 HB3  High Low Beam Replace Halogen Bulb
Wireless, Noiseless, Fanless, Plug and Play

Condition: 100% Brand New

Bulb Size:9005 HB3

Size:As picture show
Light Source：2 Sides CSP LEDs
Material: ABS+Aviation 6063 aluminum profile
Color Temperature: 6500K
Output Power (Each): 200W
Waterproof Rate: IP68
Luminous Flux: 80000LM/Set
Bulb Type: 9005 HB3
Beam Type: High Beam/ Low Beam/Foglight
Beam Angle: 360 Degrees
Placement on Vehicle: Front, Left, Right
To Fit:LED Headlight, DRL Fog light
Fitment Type:Direct Replacement    
Operating Temperature:-40 -, 80°C
Type:High & Low Beam LED    
Application 1:Replacement for led headlight High Beam or Low Beam
Voltage:DC 9-32V(fit 12V,24V vehicles)    
Lighting Technology:LED    
Features:Built in IC driver, stable current ,Ballast Included
Wattage:100W/PER,TOTAL 200 W
Bulb Life Hours:Up to 50,000 Hours    
Waterproof Rating:IP65
Suitable For:Headlight, High Beam, Low Beam ,Fog Light   
Lighting Type:Specialty Head Light Bulb    
LED Chip: High Power CSP LED chips.

Heat Dissipation Principle: Heat Pipe Technology + Aluminum Fitment Type: Direct Replacement
CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
Application 2: replacement for led headlight,fog light,or DRL(daytime running light),etc.

Package Included:
2x LED Headlight Bulb

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Make sure to have the ignition turned off and the keys removed.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.